The Next Generation of Robots Will Be Remarkably Human-Like – Futurism

In BriefHumans may sometimes take all they can do with their hands forgranted. An appreciation for that dexterity is inspiring roboticsinnovators to develop ways of improving hand function in robots. Handy Bots

Its quite common for humans especially those who work in manufacturing to tie a knot, strip the casing off a cable, insert a pin in a hole or use a hand tool such as a drill. They may seem like simple tasks, but are really very complex and involve extremely fine finger and hand motions.

Though robots are getting more and more involved in factory work and in a wide range of other types of jobs including in the service industry and health care their dexterity is not nearly as impressive. Since people first brought them to work in automotive factories more than 50 years ago, we have built robots that can weld, paint and assemble parts quite well. Todays best robotic hands can pick up familiar objects and move them to other places such as taking products from warehouse bins and putting them in boxes.

But robots cant orient a hand tool properly say, lining up a Phillips head screwdriver with the grooves on a screw, or aiming a hammer at a nail. And they definitely cant use two hands together in detailed ways, like replacing the batteries in a remote control.

Human hands are excellent at those tasks and much more. To even come close to rivaling what our hands are easily capable of, robot hands need better agility, reliability and strength and they need to be able to sense more accurately and move even more finely than they do now, to figure out what theyre holding and how to grip it best. For robots to be able to work alongside humans, well have to figure out how to make robots that can literally lend us a hand when our own two are not enough.

My research group at Northeastern University is working on doing just this, in particular for humanoid robotslike NASAs Valkyrie, which has three fingers and a thumb on each hand. Each digit has knuckle-like joints, and each hand has a wrist that can rotate easily. Were working on creating motions combinations of arm, wrist, finger and thumb movements that collectively accomplish a task, like moving a wrench in a circle to tighten a bolt, or pulling a cart from one place to another.

Rather than making each robot a custom machine tailored for a very specific task, we need to design multi-use robots, or even such capable machines that they might be called general purpose good for almost any task. One key to the success of these types of robots will be excellent hands.

Our work focuses on designing a new class of adaptable robot hands capable of precise fine movements and autonomous grasping. When robots are able to hammer in nails, change batteries and make other similar movements basic for humans but very complex for robots well be well on our way to human-like dexterity in robotic hands.

Achieving this goal also involves inventing new designs that incorporate hard and soft elements the way human bone gives strength to a grip, with skin spreading the pressure so a wine glass doesnt shatter.

Modern technological improvements are making the development process easier. With 3D printing, we can make prototypes very quickly. We can even make low-cost disposable components to try different arrangements of mechanisms, like two- or three-fingered grippers for simple pick-and-place tasks or anthropomorphic robot hands for more delicate operations.

These abilities are already second nature to humans through vision and proprioception (the ability to sense the relative positions of body parts without looking or thinking about it). Once were able to achieve them in robots, theyll be able to do things like detect if a grasp is too strong and is squeezing an object too hard.As electronic cameras and sensors get smaller, were able to incorporate them in new ways. For instance, if we put pressure sensors and cameras in a robotic hand, they can give feedback to the robot controller (whether human or automated) when a grip is secure, or if something starts to slip. One day they may be able to sense which direction the slipping object is moving, so the robot can catch it.

Another milestone will be developing methods for robots to figure out what motions they need to make in real time, including sensing whats going on in their hands at each moment. If a robot hand can detect changes in objects it is handling, or manipulate items while holding them, they could help with those common manual tasks like knot-tying and wire-stripping.

Working with two hands together is even farther into the future, though it would provide a significant boost, particularly for manufacturing. A robot that can operate a drill with two hands or pass machine parts from one hand to the other would be big improvements, allowing factories to automate even more steps in their processes.

We humans havent developed these systems yet. Achieving human-like autonomous robot dexterity will keep robotics researchers, technologists and innovators busy in the foreseeable future. It wont slow down the ongoing robotics revolution in manufacturing, because current processes still have lots of room for automation to improve safety, speed and quality. But as we make robots even better, theyll be able to give us a hand.

Taskin Padir, Associate Professor of Electrical and Computer Engineering, Northeastern University

This article was originally published on The Conversation. Read the original article.

Excerpt from:
The Next Generation of Robots Will Be Remarkably Human-Like - Futurism