Monthly Archives: January 2017

THC – Psychedelics

Posted: January 28, 2017 at 5:02 pm

THC is the crystalline substance that forms on the outside of the marijuana plant. It is the substance in marijuana responsible for its euphoric effects.

THC is known scientifically as tetrahydrocannabinol and it is the active chemical found in marijuana. THC is the most widely abused drug in the United States and continues to be controversial in both cases of personal consumption and in cases of being appropriate for certain medical uses.

THC comes from the marijuana plant also known as cannabis sativa. Tetrahydrocannabinol, or THC is the active ingredient in the marijuana plant and the primary ingredient responsible for producing the euphoric effects of the drug.

THC resembles a crystaline that forms on the outside of the buds of the marijuana plant. Some people believe that THC can be used for medical purposes while others believe that there are no known medical uses that are considered safe. Regardless, THC is found in all variations of marijuana though medical marijuana often contains lower or higher levels of THC depending on the preference of the user and why it is being used.

The effects of THC vary from one user to the next but generally include sedation and relaxation. As the THC enters the bloodstream the user will feel the effects of the drug which can last up to 3 hours following the initial onset of effects. If marijuana is not smoked but is rather ingested, the user will feel the effects of THC about thirty minutes after it is consumed and the effects will generally last about 4 hours.

THC causes the dopamine release that takes place in the body to occur more quickly which can lead to heightened euphoria. Many users experience heightened awareness and sensitivity to sound, light and color. Perception of time is normally reduced and the user will feel as if time is taking longer to pass.

Smoking THC will lead to increased thirst and feelings of dehydration. The user will have dry mouth and may experience intense hunger while under the influence of THC. Many people experience heightened anxiety and even panic when under the influence of THC.

Using THC or marijuana can lead to an array of complications for the user. If the drug is regularly smoked, complications include damage to the lungs, susceptibility to infection, lung cancer and other serious side effects. Ingesting THC will not lead to respiratory problems but can still have implications in terms of increasing fear and anxiety, increasing risk of depression and altering appetite.

Sustained marijuana use, even in low doses, will cause the user to feel a lack of coordination and a lack of concentration. Over time, people who abuse marijuana are more likely to experience memory loss, coordination loss and additional problems related to impaired short term memory. Studies have proven that marijuana causes difficulty and impairment for students that can last for up to a full month after the drug is used, in some cases the aftermath will continue for many months after the last use of the drug.

Increased risk of psychosis and schizophrenia has been reported with chronic marijuana use. THC use can cause adverse problems in work, home and school. Social effects include isolation and may lead to depression. Heavy marijuana users suffer great damage to their social status and may require long term counseling in order to fully turn their lives around post marijuana addiction.

Is THC addictive? Yes!

Marijuana is an addictive substance that will lead to erratic drug-seeking behavior and a series of withdrawal symptoms when the user tries to quit. Although the symptoms of marijuana withdrawal are not dangerous or potentially deadly for the user, there are a number of risks associated with marijuana addiction.

Becoming addicted to THC will likely cause problems in the users relationship and may lead to financial implications that make quitting even more difficult. People who regularly smoke pot are likely to suffer an array of consequences including health problems, emotional problems, family and relationship problems, legal trouble, social isolation and individual isolation as a result of their addiction to THC.

The best way to prevent addiction to THC is to not smoke pot. With all of the controversy that is taking place about marijuana and the intended medical uses of the drug, its easy to fall into a mindset in which it would seem like smoking pot is ok to some degree but this can lead to physical and psychological dependence which will result in an array of consequences for the user.

Treatment is often required when a user becomes addicted to THC. Counseling and therapy are the most effective means of treatment but medication may be necessary if dopamine levels have been depleted to a point in which they cannot be restoredthis is yet another reason to avoid smoking pot.

Originally posted here:

THC - Psychedelics

Posted in Psychedelics | Comments Off on THC – Psychedelics

Eczema Information from Drugs.com

Posted: at 4:43 pm

Atopic dermatitis, commonly referred to as eczema, is a chronic skin disorder categorized by scaly and itching rashes. People with eczema often have a family history of allergic conditions like asthma, hayfever or eczema.

Eczema is most common in infants (where it is known as infantile eczema) and at least half of those cases clear by age 3. In adults, it is generally a chronic or recurring condition.

A hypersensitivity reaction (similar to an allergy) occurs in the skin, causing chronic inflammation. The inflammation causes the skin to become itchy and scaly. Chronic irritation and scratching can cause the skin to thicken and have a texture like leather. Exposure to environmental irritants can worsen symptoms, as can dryness of the skin, exposure to water, temperature changes, and stress.

Studies have shown that children who are breast-fed are less likely to get eczema. This is also true when the nursing mother has avoided cow's milk in her diet. Other dietary restrictions may include eggs, fish, peanuts, and soy.

Eczema tends to run in families. Control of stress, nervousness, anxiety, and depression can be beneficial in treating/avoiding eczema in some cases.

Diagnosis is primarily based on the appearance of the skin and on personal and family history. The health care provider should examine the lesions to rule out other possible causes. A skin lesion biopsy may be performed, but is not always required to make the diagnosis.

Call and make an appointment with your health care provider if your eczema does not respond to moisturizers or avoiding known allergens, if your symptoms worsen, if treatment is ineffective, or if signs of infection (such as fever, redness, pain) occur.

Consult your health care provider for a diagnosis of eczema because it can be difficult to differentiate from other skin disorders. Treatment should be guided by the health care provider.

Treatment may vary depending on the appearance (stage) of the lesions -- acute "weeping" lesions, dry scaly lesions, or chronic dry, thickened lesions are each treated differently.

Anything that aggravates the symptoms should be avoided whenever possible, including any food allergens and irritants such as wool and lanolin.

Dry skin often makes the condition worse. When washing or bathing, keep water contact as brief as possible and use less soap than usual. After bathing, it is important to trap the moisture in the skin by applying lubricating cream on the skin while it is damp. Temperature changes and stress may cause sweating and aggravate the condition.

Treatment of weeping lesions may include soothing moisturizers, mild soaps, or wet dressings.

Mild anti-itch lotions or topical corticosteroids (low potency) may soothe less severe or healing areas or dry scaly lesions.

Chronic thickened areas may be treated with ointments or creams that contain tar compounds, corticosteroids (medium to very high potency), and ingredients that lubricate or soften the skin. Systemic corticosteroids may be prescribed to reduce inflammation in some severe cases.

The latest treatment for eczema is a class of skin medications called topical immunomodulators (TIMs). These medications are steroid-free. They include tacrolimus (Protopic) and pimecrolimus (Elidel). Studies have shown a success rate as high as 80% among patients using these new medications.

Recommended for you

See the original post:
Eczema Information from Drugs.com

Posted in Eczema | Comments Off on Eczema Information from Drugs.com

Neo-eugenics | definition of Neo-eugenics by Medical …

Posted: at 1:01 am

eugenics [u-jeniks]

the study and control of procreation as a means of improving hereditary characteristics of future generations. The concept has sometimes been used in a pseudoscientific way as an excuse for unethical, racist, or even genocidal practices such as involuntary sterilization or certain other practices in Nazi Germany and elsewhere.

macro eugenics eugenics policies that affect whole populations or groups. This has sometimes led to racism and genocide, such as the Nazi policies of sterilization and extermination of ethnic groups.

micro eugenics eugenics policies affecting only families or kinship groups; such policies are directed mainly at women and thus raise special ethical issues.

negative eugenics that concerned with prevention of reproduction by individuals considered to have inferior or undesirable traits.

positive eugenics that concerned with promotion of optimal mating and reproduction by individuals considered to have desirable or superior traits.

1. Practices and policies, as of mate selection or of sterilization, which tend to better the innate qualities of progeny and human stock.

2. Practices and genetic counseling directed to anticipating genetic disability and disease.

[G. eugeneia, nobility of birth, fr. eu, well, + genesis, production]

The study or practice of attempting to improve the human gene pool by encouraging the reproduction of people considered to have desirable traits and discouraging or preventing the reproduction of people considered to have undesirable traits.

eugenic adj.

eugenically adv.

Etymology: Gk, eu + genein, to produce

the study of methods for controlling the characteristics of populations through selective breeding.

1. Practices and policies, as in mate selection or sterilization, which tend to better the innate qualities of progeny and human stock.

2. Practices and genetic counseling directed to anticipating genetic disability and disease.

[G. eugeneia, nobility of birth, fr. eu, well, + genesis, production]

A social movement in which the population of a society, country, or the world is to be improved by controlling the passing on of hereditary information through mating.

The rest is here:

Neo-eugenics | definition of Neo-eugenics by Medical

. Bookmark the

.

Follow this link:

Neo-eugenics | definition of Neo-eugenics by Medical ...

Posted in Neo-eugenics | Comments Off on Neo-eugenics | definition of Neo-eugenics by Medical …

Cyberpunk Books – goodreads.com

Posted: at 12:58 am

Cyberpunk is a subgenre of science fiction in a future setting that tends to focus on society as "high tech low life" featuring advanced technological and scientific achievements, such as information technology and cybernetics, juxtaposed with a degree of breakdown or radical change in the social order.

Cyberpunk plots often center on conflict among artificial intelligences, hackers, and among megacorporations, and tend to be set in a near-future Earth, rather than in the far-future settings or galactic vistas found in novels such as Isaac Asimov's Foundation or Frank Herbert's Dune.The setting

Cyberpunk plots often center on conflict among artificial intelligences, hackers, and among megacorporations, and tend to be set in a near-future Earth, rather than in the far-future settings or galactic vistas found in novels such as Isaac Asimov's Foundation or Frank Herbert's Dune.The settings are usually post-industrial dystopias but tend to feature extraordinary cultural ferment and the use of technology in ways never anticipated by its original inventors ("the street finds its own uses for things"). Much of the genre's atmosphere echoes film noir, and written works in the genre often use techniques from detective fiction.

Classic cyberpunk characters were marginalized, alienated loners who lived on the edge of society in generally dystopic futures where daily life was impacted by rapid technological change, an ubiquitous datasphere of computerized information, and invasive modification of the human body. Lawrence Person

Read this article:

Cyberpunk Books - goodreads.com

Posted in Cyberpunk | Comments Off on Cyberpunk Books – goodreads.com

Transcranial magnetic stimulation – Wikipedia

Posted: at 12:58 am

Transcranial magnetic stimulation (TMS) is a magnetic method used to stimulate small regions of the brain. During a TMS procedure, a magnetic field generator, or "coil", is placed near the head of the person receiving the treatment.[1]:3 The coil produces small electric currents in the region of the brain just under the coil via electromagnetic induction. The coil is connected to a pulse generator, or stimulator, that delivers electric current to the coil.[2]

TMS is used diagnostically to measure the connection between the brain and a muscle to evaluate damage from stroke, multiple sclerosis, amyotrophic lateral sclerosis, movement disorders, motor neuron disease and injuries and other disorders affecting the facial and other cranial nerves and the spinal cord.[3]

Evidence suggests it is useful for neuropathic pain[4] and treatment-resistant major depressive disorder.[4][5] A 2015 Cochrane review found not enough evidence to make any conclusions in schizophrenia.[6] For negative symptoms another review found possible efficacy.[4] As of 2014, all other investigated uses of repetitive TMS have only possible or no clinical efficacy.[4]

Matching the discomfort of TMS to distinguish true effects from placebo is an important and challenging issue that influences the results of clinical trials.[4][7][8][9] The greatest risks of TMS are the rare occurrence of syncope (fainting) and even less commonly, induced seizures.[7] Other adverse effects of TMS include discomfort or pain, transient induction of hypomania, transient cognitive changes, transient hearing loss, transient impairment of working memory, and induced currents in electrical circuits in implanted devices.[7]

The use of TMS can be divided into diagnostic and therapeutic uses.

TMS can be used clinically to measure activity and function of specific brain circuits in humans.[3] The most robust and widely accepted use is in measuring the connection between the primary motor cortex and a muscle to evaluate damage from stroke, multiple sclerosis, amyotrophic lateral sclerosis, movement disorders, motor neuron disease and injuries and other disorders affecting the facial and other cranial nerves and the spinal cord.[3][10][11][12] TMS has been suggested as a means of assessing short-interval intracortical inhibition (SICI) which measures the internal pathways of the motor cortex but this use has not yet been validated.[13]

For neuropathic pain, for which there is little effective treatment, high-frequency (HF) repetitive TMS (rTMS) appears effective.[4] For treatment-resistant major depressive disorder, HF-rTMS of the left dorsolateral prefrontal cortex (DLPFC) appears effective and low-frequency (LF) rTMS of the right DLPFC has probable efficacy.[4][5] The Royal Australia and New Zealand College of Psychiatrists has endorsed rTMS for treatment resistant MDD.[14] As of October 2008, the US Food and Drug Administration authorized the use of rTMS as an effective treatment for clinical depression.[15]

Although TMS is generally regarded as safe, risks increase for therapeutic rTMS compared to single or paired TMS for diagnostic purposes.[16] In the field of therapeutic TMS, risks increase with higher frequencies.[7]

The greatest immediate risk is the rare occurrence of syncope (fainting) and even less commonly, induced seizures.[7][17]

Other adverse short-term effects of TMS include discomfort or pain, transient induction of hypomania, transient cognitive changes, transient hearing loss, transient impairment of working memory, and induced currents in electrical circuits in implanted devices.[7]

During a transcranial magnetic stimulation (TMS) procedure, a magnetic field generator, or "coil" is placed near the head of the person receiving the treatment.[1]:3 The coil produces small electric currents in the region of the brain just under the coil via electromagnetic induction. The coil is positioned by finding anatomical landmarks on the skull including, but not limited to, the inion or the nasion.[18] The coil is connected to a pulse generator, or stimulator, that delivers electric current to the coil.[2]

The ANT Neuro neuronavigation solution visor2 was approved as a CE class IIa medical device in April 2012.

Nexstim obtained 510(k) FDA clearance of Navigated Brain Stimulation for the assessment of the primary motor cortex for pre-procedural planning in December 2009.[19]

Nexstim obtained FDA 510K clearance for NexSpeech navigated brain stimulation device for neurosurgical planning in June 2011.[20]

A number of deep TMS have received FDA 510k clearance to market for use in adults with treatment resistant major depressive disorders.[21][22][23][24]

The use of single-pulse TMS was approved by the FDA for treatment of migraines in December 2013.[25] It is approved as a Class II medical device under the "de novo pathway".[26][27]

In 2013, several commercial health insurance plans in the United States, including Anthem, Health Net, and Blue Cross Blue Shield of Nebraska and of Rhode Island, covered TMS for the treatment of depression for the first time.[28] In contrast, UnitedHealthcare issued a medical policy for TMS in 2013 that stated there is insufficient evidence that the procedure is beneficial for health outcomes in patients with depression. UnitedHealthcare noted that methodological concerns raised about the scientific evidence studying TMS for depression include small sample size, lack of a validated sham comparison in randomized controlled studies, and variable uses of outcome measures.[29] Other commercial insurance plans whose 2013 medical coverage policies stated that the role of TMS in the treatment of depression and other disorders had not been clearly established or remained investigational included Aetna, Cigna and Regence.[30]

Policies for Medicare coverage vary among local jurisdictions within the Medicare system,[31] and Medicare coverage for TMS has varied among jurisdictions and with time. For example:

The United Kingdom's National Institute for Health and Care Excellence (NICE) issues guidance to the National Health Service (NHS) in England, Wales, Scotland and Northern Ireland. NICE guidance does not cover whether or not the NHS should fund a procedure. Local NHS bodies (primary care trusts and hospital trusts) make decisions about funding after considering the clinical effectiveness of the procedure and whether the procedure represents value for money for the NHS.[36]

NICE evaluated TMS for severe depression (IPG 242) in 2007, and subsequently considered TMS for reassessment in January 2011 but did not change its evaluation.[37] The Institute found that TMS is safe, but there is insufficient evidence for its efficacy.[37]

In January 2014, NICE reported the results of an evaluation of TMS for treating and preventing migraine (IPG 477). NICE found that short-term TMS is safe but there is insufficient evidence to evaluate safety for long-term and frequent uses. It found that evidence on the efficacy of TMS for the treatment of migraine is limited in quantity, that evidence for the prevention of migraine is limited in both quality and quantity.[38]

TMS uses electromagnetic induction to generate an electric current across the scalp and skull without physical contact. A plastic-enclosed coil of wire is held next to the skull and when activated, produces a magnetic field oriented orthogonally to the plane of the coil. The magnetic field passes unimpeded through the skin and skull, inducing an oppositely directed current in the brain that activates nearby nerve cells in much the same way as currents applied directly to the cortical surface.[39]

The path of this current is difficult to model because the brain is irregularly shaped and electricity and magnetism are not conducted uniformly throughout its tissues. The magnetic field is about the same strength as an MRI, and the pulse generally reaches no more than 5 centimeters into the brain unless using the deep transcranial magnetic stimulation variant of TMS.[40] Deep TMS can reach up to 6cm into the brain to stimulate deeper layers of the motor cortex, such as that which controls leg motion.[41]

From the BiotSavart law

it has been shown that a current through a wire generates a magnetic field around that wire. Transcranial magnetic stimulation is achieved by quickly discharging current from a large capacitor into a coil to produce pulsed magnetic fields between 2 and 3 T.[42] By directing the magnetic field pulse at a targeted area of the brain, one can either depolarize or hyperpolarize neurons in the brain. The magnetic flux density pulse generated by the current pulse through the coil causes an electric field as explained by the Maxwell-Faraday equation,

This electric field causes a change in the transmembrane current of the neuron, which leads to the depolarization or hyperpolarization of the neuron and the firing of an action potential.[42]

The exact details of how TMS functions are still being explored. The effects of TMS can be divided into two types depending on the mode of stimulation:

MRI images, recorded during TMS of the motor cortex of the brain, have been found to match very closely with PET produced by voluntary movements of the hand muscles innervated by TMS, to 522mm of accuracy.[45] The localisation of motor areas with TMS has also been seen to correlate closely to MEG[46] and also fMRI.[47]

The design of transcranial magnetic stimulation coils used in either treatment or diagnostic/experimental studies may differ in a variety of ways. These differences should be considered in the interpretation of any study result, and the type of coil used should be specified in the study methods for any published reports.

The most important considerations include:

With regard to coil composition, the core material may be either a magnetically inert substrate (i.e., the so-called 'air-core' coil design), or possess a solid, ferromagnetically active material (i.e., the so-called 'solid-core' design). Solid core coil design result in a more efficient transfer of electrical energy into a magnetic field, with a substantially reduced amount of energy dissipated as heat, and so can be operated under more aggressive duty cycles often mandated in therapeutic protocols, without treatment interruption due to heat accumulation, or the use of an accessory method of cooling the coil during operation. Varying the geometric shape of the coil itself may also result in variations in the focality, shape, and depth of cortical penetration of the magnetic field. Differences in the coil substance as well as the electronic operation of the power supply to the coil may also result in variations in the biophysical characteristics of the resulting magnetic pulse (e.g., width or duration of the magnetic field pulse). All of these features should be considered when comparing results obtained from different studies, with respect to both safety and efficacy.[48]

A number of different types of coils exist, each of which produce different magnetic field patterns. Some examples:

Design variations in the shape of the TMS coils allow much deeper penetration of the brain than the standard depth of 1.52.5cm. Circular crown coils, Hesed (or H-core) coils, double cone coils, and other experimental variations can induce excitation or inhibition of neurons deeper in the brain including activation of motor neurons for the cerebellum, legs and pelvic floor. Though able to penetrate deeper in the brain, they are less able to produce a focused, localized response and are relatively non-focal.[7]

Early attempts at stimulation of the brain using a magnetic field included those, in 1896, of Jacques-Arsne d'Arsonval in Paris and in 1910, of Silvanus P. Thompson in London.[50] The principle of inductive brain stimulation with eddy currents has been noted since the 20th century[citation needed]. The first successful TMS study was performed in 1985 by Anthony Barker and his colleagues at the Royal Hallamshire Hospital in Sheffield, England.[51] Its earliest application demonstrated conduction of nerve impulses from the motor cortex to the spinal cord, stimulating muscle contractions in the hand. As compared to the previous method of transcranial stimulation proposed by Merton and Morton in 1980[52] in which direct electric current was applied to the scalp, the use of electromagnets greatly reduced the discomfort of the procedure, and allowed mapping of the cerebral cortex and its connections.

TMS research in animal studies is limited due to early FDA approval of TMS treatment of drug-resistant depression. Because of this, there has been no specific coils for animal models. Hence, there are limited number of TMS coils that can be used for animal studies.[53] There are some attempts in the literature showing new coil designs for mice with an improved stimulation profile.[54]

Areas of research include:

It is difficult to establish a convincing form of "sham" TMS to test for placebo effects during controlled trials in conscious individuals, due to the neck pain, headache and twitching in the scalp or upper face associated with the intervention.[4][7] "Sham" TMS manipulations can affect cerebral glucose metabolism and MEPs, which may confound results.[67] This problem is exacerbated when using subjective measures of improvement.[7] Placebo responses in trials of rTMS in major depression are negatively associated with refractoriness to treatment, vary among studies and can influence results.[68]

A 2011 review found that only 13.5% of 96 randomized control studies of rTMS to the dorsolateral prefrontal cortex had reported blinding success and that, in those studies, people in real rTMS groups were significantly more likely to think that they had received real TMS, compared with those in sham rTMS groups.[69] Depending on the research question asked and the experimental design, matching the discomfort of rTMS to distinguish true effects from placebo can be an important and challenging issue.[4][7][8][9]

View original post here:

Transcranial magnetic stimulation - Wikipedia

Posted in Tms | Comments Off on Transcranial magnetic stimulation – Wikipedia

Virtual Reality Gets Real – theatlantic.com

Posted: at 12:55 am

In 1965, Ivan Sutherland, a computer-graphics pioneer, addressed an international meeting of techies on the subject of virtual reality. The ultimate virtual-reality display, he told the audience, would be a room within which the computer can control the existence of matter. A chair displayed in such a room would be good enough to sit in. Handcuffs displayed in such a room would be confining, and a bullet displayed in such a room would be fatal. With appropriate programming, such a display could literally be the Wonderland into which Alice walked.

Virtual reality has advanced rapidly in the past couple of yearsthe much-anticipated Oculus Rift headset is expected to arrive in stores in early 2016, followed closely by several other devices. Yet the technology is still very new, and Sutherlands vision seems little closer to, well, actual reality. Right now, its like when you first had cellphones, Richard Marks, one of the lead engineers working on Project Morpheus, Sonys virtual-reality headset, told me. A lot of focus is still on the most-basic things.

I recently spoke with scientists, psychologists, engineers, and developers about the possibilities for this emerging field. Where might it eventually take usand will that be somewhere we want to go?

Being Virtually Anywhere

During a recent demonstration of Google Cardboarda DIY headset thats made of cardboard and uses a smartphone for the displayI found myself by turns atop a rocky peak, in a barn next to a snorting horse, and on a gondola making my way up a mountain. The gondola ride gave me vertigo.

We react like that, experts say, because our brains are easily fooled when what we see on a display tracks our head movements. We have a reptilian instinct that responds as if its real: Dont step off that cliff; this battle is scary, Jeremy Bailenson, the founding director of Stanfords Virtual Human Interaction Lab, told me. The brain hasnt evolved to tell you its not real.

Much of the excitement about virtual reality has come from the gaming community. Who wouldnt want to experience a game so completely? But gaming is just the start. At Sony, Marks has worked with NASA to conjure the experience of standing on Marsa view that could help scientists better understand the planet. David Laidlaw, the head of the Visualization Research Lab at Brown University, told me that his team has re-created a temple site in Petra, Jordan, enabling researchers to see previously unclear relationships between objects found there.

Google is testing Expeditions, a way of sending students to places like the Great Barrier Reef, where they can virtually scuba dive as part of a lesson on marine biology and ocean acidification. Similar approaches may enhance professional training. By donning a pair of goggles, a neurosurgeon could navigate brain structures before surgery; a chemist could step inside a drug to understand it on the cellular level; an architect could walk through a building shes designing.

Another possibility: Imagine that youre unable to attend a family gathering. With a pair of glasses, youre in the middle of the action. And everyone there wears glasses that make it appear as though youre present. The whole thing is recorded, so you can replay the experience whenever youd like. Ten years from now, such a scenario might be common.

And consider the potential for telecommuting. Henry Fuchs, a professor at the University of North Carolina at Chapel Hill and a leader in the field, envisions virtual offices. You could use the physical space of your housea real desk, a real computerbut interact with your colleagues as if they were in the same room as you.

Seeing Through Others Eyes

In his lab at Stanford, Bailenson studies how virtual reality changes behavior. Hes found that if your avatar is taller than you are in real life, you become more confident. If you have a particularly attractive avatar, you become friendlier. If youre young and you have an avatar that is a senior citizen, you save more money. These changes last even after you leave the virtual realm.

And avatars could soon become more convincing. Most commercial virtual-reality systems capture only the movement of your head and hands. In 2013, though, Apple acquired PrimeSense, an Israeli company developing technology to track the movements of your whole body with infrared sensors and special microchips. And a company called Faceshift is working to capture facial expressions, so that if you smile or roll your eyes, your avatar will too.

Virtual reality has already proved useful in treating phobias and PTSD. It can help people overcome a fear of heights, for example, through simulations of standing on a balcony or walking across a bridge. Bailenson and others think it could also be used to build empathy. What if you could step inside a documentary, rather than just watching it on a screenalmost literally walking in someone elses shoes? That was the goal of Clouds Over Sidra, a virtual-reality filmcreated through a partnership between the United Nations and Samsungthat followed a 12-year-old girl in a Syrian-refugee camp in Jordan.

And what if you could do something similar in real time? Combine this sort of immersive storytelling, as it evolves, with technologies like Periscope and Meerkatapps that let users stream live videoand you can in essence see the world through anyones eyes, Clay Bavor, the head of Googles virtual-reality initiatives, told me. A protester in Cairo or Athens or Baltimore, for example, could use a special camera to give people around the world a 360-degree view of what its like to be there.

Engaging All Your Senses

Google recently acquired Thrive Audio, a company that specializes in spatial audiosounds that your ear registers as emanating from a particular place. A virtual waterfall grows louder as you move toward it. Something catches your ear from behind. You turn, and see a deer approaching. The audio becomes three-dimensional, truly surrounding you.

Smell could become part of the virtual experience as well. A company called Feelreal has developed a mask that releases scents, such as the smell of fire or the ocean, to enhance what you see in a headset. (The project is hampered by the need to preload the scents youre likely to encounter, among other problems.) Closely related is the ability to taste what you see. Researchers in Singapore are developing electrodes that, when placed on your tongue, mimic basic tastes, such as sweet, salty, bitter, and sour.

What about touch? Could we one day find that when we dip our fingers in virtual water, it actually feels wet? David Laidlaw considers resolving this challenge, known as the haptics problem, to be the holy grail of virtual reality. But that doesnt mean its insurmountable. Im confident well do it within our lifetimes, Palmer Luckey, the founder of Oculus, told me. There are no fundamental physical laws that prevent us from building something thats almost perfect. Laidlaw is less optimistiche thinks that creating lifelike haptics will take 100 yearsbut he agrees that a virtual world may one day be a nearly perfect simulacrum of the real one.

Of course, there could be unintended consequences. Already people are developing vision problems and vitaminD deficienciesnot to mention obesity and diabetesbecause they spend too much time in front of screens. (See The Nature Cure.) What might a flawlessly rendered virtual world mean for our health?

A Neuromancer Future?

Jeremy Bailenson was inspired to work in virtual reality in part by Neuromancer, a 1984 novel that depicts a future in which people can jack in their brains directly to a virtual world. Perhaps, Bailenson speculates, thats where virtual reality is headed. He imagines that in 50 or 100 years we might develop a brain-machine interface that taps directly into the nervous system.

Perhaps then well find that rather than jacking in for a while and calling it quits, we can, like Alice, move wholly into a Wonderland where the laws of the prosaic world (gravity, aging) no longer apply. Virtual reality could then become akin to the Singularity, a concept described by Ray Kurzweil, a futurist and Google engineer, among others: a way for our minds to separate from our bodies and, uploaded into a digital realm, live on even as our physical selves grow old and die. Just like Wonderland, its a vision equal parts entrancing and frightening.

1930: The first mechanical flight simulator is patented.

194245: The U.S. military uses View-Masters for training during World War II. The device later becomes a popular childrens toy.

1962: Morton Heilig patents the Sensorama, an experience theater featuring 3D video, a vibrating chair, fans, and artificial smells.

1968: MIT develops the first virtual-reality headset, a device so heavy, it must be suspended from the ceiling. Its nickname: the Sword of Damocles.

1996: Virtual Boy, Nintendos 3D video-game console, is discontinued because it causes nausea.

2014: Facebook buys Oculus, a virtual-reality company, for $2 billion.

2115: Virtual reality incorporates haptic sensations, enabling users to touch what they see.

See the original post:

Virtual Reality Gets Real - theatlantic.com

Posted in Virtual Reality | Comments Off on Virtual Reality Gets Real – theatlantic.com

Test Automation Services for Development of Regression …

Posted: at 12:54 am

Gallop is a leader in providing test automation services and has built a dedicated Automation Center of Excellence (ACoE) backed by a decade of experience in executing test automation engagements for global clients & a large pool of test automation experts. Gallop Test Automation Accelerator Kit (GTAAK) comprises of pre-built test automation scripts, utilities, process assets and frameworks, and has helped many companies in implementing successful test automation initiatives.

Gallops test automation strategy enables organizations to increase release velocity, reduce time to market and reduce overall testing effort resulting in significant return on investment (ROI). Gallop has developed a tool and technology agnostic, plug-and-play test automation framework with pre-built interfaces to CI servers, application lifecycle management tools and defect management tools that fully support the majority of test automation tools adopted by organizations.

Gallop invests over a $1mn annually to develop intellectual property and has committed partnerships with industry leading automation tool vendors to complement innovation. Gallop is also an active contributor in open source platforms for test automation and is a silver sponsor of Selenium. Gallop has also developed a host of pre-built automated test suites for industry leading 3rd party products like SAP, Oracle, PeopleSoft, Salesforce, SAP Hybris, MS Dynamics CRM, and Work Day.

More:

Test Automation Services for Development of Regression ...

Posted in Automation | Comments Off on Test Automation Services for Development of Regression …

Automation | Technologies | Systems | Integrator …

Posted: at 12:53 am

Automation Technologies is an engineering and software development firm that offers the highest level of experience in industrial automation and process control. Our reputation for quality, reliability and affordability has been built on superior products and services provided for various industries including pharmaceutical, chemical, polymer, plastic, textile, and pulp and paper.

When you choose Automation Technologies, you benefit from the technical experience of senior engineers and specialists who average more than 15 years in their fields of automation and process control. With our broad network of corporate partners, Automation Technologies can meet virtually any automation and controls need, providing our customers with "one-stop-shopping" for technically superior solutions backed by outstanding service and support.

Wherever you are in the automation process, from planning to implementation, Automation Technologies has the experience, knowledge and flexibility to keep your company on the leading edge of automation and process control.

NEW! Check out our Training Videos

Check out our Articles Section!

Read more:

Automation | Technologies | Systems | Integrator ...

Posted in Automation | Comments Off on Automation | Technologies | Systems | Integrator …

Automation – Mazak Corporation

Posted: at 12:53 am

Automation can enhance your productivity through increased machine tool utilization. However, to reap the significant competitive advantages that coincide with automation, you must efficiently and effectively integrate it into your operations.

We are a single source provider for all your automation needs. And to ensure you have the right automation for your facility, we have developed 4 various levels of automation to fulfill your specific production needs.

Bar feeders offer immediate increases in productivity. However, while they are a basic form of automation, its important to select the right one to ensure you achieve increased material utilization as well as gain the highest levels of productivity, throughput and quality from your turning operations.

Gantry loaders provide fast, high-production loading and unloading. They bring more versatility, flexibility and productivity when managing chuck and shaft work by offering a variety of loading stations and robotic hands. Gantry loader systems are easy to install and operate, providing a quick, turnkey system that results in immediate increases in productivity.

Offering amazing production flexibility, our PALLETECH system brings high levels of efficiency to high-mix, low-volume production as well as high-volume operations. Compatible with our range of horizontal machining centers, Multi-Tasking machines and ORBITEC 20 machining center for large parts, the PALLETECH is available in single, double and triple level pallet stocker configurations. Because of its modular, pre-engineered construction, PALLETECH easily expands along with your growing business. In fact, it can accommodate up to 16 machines, 6 to 240 pallets and up to 8 loading stations.

A highly advanced alternative to traditional production, articulated robots provide automation for one or multiple machines as well as part transfers to peripheral operations. They also eliminate the challenges that come with handling large, heavy or cumbersome parts. Articulated robots use rotary joints to achieve an increased change of motion. From simple 2-joint robots to complex 10-joint robots, you have the power to choose just how much range of motion is necessary to gain the competitive advantage.

Follow this link:

Automation - Mazak Corporation

Posted in Automation | Comments Off on Automation – Mazak Corporation

Automationtechies | Automation Engineering Recruiting

Posted: at 12:53 am

7 Questions Candidates Should ask During an #Interview: shar.es/1OwO6X via @Visually #infographic #interviewtips #jobinterview

About 3 days ago from automationtechies's Twitter reply retweet favorite

Controls Technician #jobs! Mfg company, unlimited career advancement, state-of-the-art facility, & NO travel: bit.ly/2jNLniP #MNjob

About 4 days ago from automationtechies's Twitter reply retweet favorite

20 New Jobs: Engineers, Technicians, Sales, and others! Check 'em out: eepurl.com/cx94X9 #engineerjob #engineering #automation #jobs

About 5 days ago from automationtechies's Twitter reply retweet favorite

Did you miss the results of @automation_com's 2016 salary survey? Check them out here: automation.com/salary-survey- #engineeringsalary

About 2 weeks ago from automationtechies's Twitter reply retweet favorite

New Job for a New Year! Check out our current openings in automation, manufacturing, and engineering: eepurl.com/cwxiCf #engineerjob pic.twitter.com/fqqyE6am6h

About 3 weeks ago from automationtechies's Twitter reply retweet favorite

106 job openings across the US! Use our map to view open positions near you or run a search to find your next move: jobs.automationtechies.com

Last month from automationtechies's Twitter reply retweet favorite

Process Controls Engineer Job in San Jo job at automationtechies - San Jose indeed.com/viewjob?jk=4f8 #Indeed #jobs

About a month ago from automationtechies's Twitter reply retweet favorite

Automation Engineer I - Medical Devices job at automationtechies - Rockville indeed.com/viewjob?jk=e4a #Indeed #jobs

About a month ago from automationtechies's Twitter reply retweet favorite

Sales Engineer (Systems Integrator - fo job at automationtechies - United States indeed.com/viewjob?jk=729 #Indeed #jobs

About a month ago from automationtechies's Twitter reply retweet favorite

12 things successful people do in the last 10 minutes of the workday read.bi/2f9Zpbr via @BI_Careers #careeradvice

About a month ago from automationtechies's Twitter reply retweet favorite

Read the original:

Automationtechies | Automation Engineering Recruiting

Posted in Automation | Comments Off on Automationtechies | Automation Engineering Recruiting