Do you have an Akai MPC60 or MPC60-II with the original version 2.12 software? Our version 3.10 software update adds the software improvements of the MPC3000 to the MPC60 or MPC60-II. It comes on 4 chips that you can install yourself and adds lots of useful features.

Sampling No Longer Limited to 5 Seconds

The 5 second limit for new samples is gone, allowing you to sample individual sounds up to the limits of memory (13 or 26 seconds, depending on whether or not your MPC60 contains memory expansion.) And sequence memory is no longer erased before sampling.

Stereo Sampling

Version 3.10 won't put a stereo sampling input on the back of your MPC60, but it does provide a method of creating stereo samples. Simply sample the left and right sides of a stereo sound separately as mono sounds, then a new screen in the software automatically re-syncs and combines them to form the stereo sound.

MIDI File Save and Load

Load standard PC-format MIDI file disks or save sequences as MIDI files. Move sequences between your MPC and PC or Mac sequencers.

Note: this requires that you download our Midi File Save utility, save it to an MPC60 floppy then boot your MPC60 from it.

Reads All MPC3000 Files Including Stereo Sounds

Reads all MPC3000 files, including mono or stereo sounds (saved to MPC60 floppies) and directly reads MPC3000 hard disks (MPC-SCSI required). Reads all MPC60 files.

Sound Compression Doubles Sound Memory

This features resamples existing sounds in memory from the normal 40 kHz to 20 kHz, thereby fitting into half the memory space. This works surprisingly well for most sounds (not so well for cymbals). In an expanded MPC60 (26 seconds) containing all compressed sounds, that's equivalent to 52 seconds of sounds.

Voice Restart for "Sound Stuttering"

Sounds may be set to restart when a single pad is played repeatedly, for "sound stuttering" effects. Also, sounds may be set to stop when finger is removed from pad, and any sound may be programmed to stop any other sound (choked cymbal stops ringing cymbal).

8 Drum Sets in Memory

Hold up to 8 drum sets in memory at once, each with 64 pad assignments from a common bank of up to 128 sounds. When saved to disk, sounds in drum sets are now saved as individual sound files, eliminating redundant sound data on disk when saving sets that share sounds.

4 Pad Banks for 64 Pad Assignments

Doubles the number of sounds immediately playable.

Hihat Slider Doubles as Realtime Tuning

The Hihat Decay Slider may now be assigned to any pad and may alternatively affect tuning, decay or attack in real time, with all movements recorded into the sequence.

Cut and Paste Sample Editing

Any portion of a sound may be removed and inserted at any point within another sound with single sample accuracy.

Hard Disk Save and Load

If you own the Marion Systems MPC-SCSI Hard Disk Interface for the MPC60, hard disk save and load operations are now included and work with the Iomega Zip 100mB or 250 mB drives.

Step from Note to Note in Step Edit

In Step Edit, the REWIND [<] and FAST FORWARD [>] keys may now be used to search to the previous or next event within a track, regardless of location. Also, you may now cut and paste events.

Streamlined MPC3000 Displays

Screen displays are improved and more intuitive, nearly identical to the MPC3000. For example, 4 letter pad names are replaced in screens by the full sound name.

New Sequence Edit Features

Most sequence editing functions now permit selection of specific drums to be edited. The new Shift Timing feature shifts track timing independent of timing correction. And the new Edit Note Number Assignment feature permits, for example, all snare notes in a track to be changed to rimshots or any other sound.

New Sound and Sequence Files in 3.10 Format

We've created a few sound and sequence files in the new version 3.10 format that you can download here.

Also Works on ASQ10 Sequencer

Version 3.10 can also be installed in the Akai ASQ10 Sequencer, adding the above features related to sequencing. (Details)

And More

Three-level sound stacking or velocity switch per pad. Simplified interfacing with external MIDI gear. MIDI Local Mode. Automatic "best sound start" removes dead space at start of new drum samples. 16 LEVELS provides 16 attack or decay levels.

Note: Due to low demand for this product, we are no longer printing user manuals so a user manual will not be included. However, you can download the user manual from the link at left.

View post:

MPC60 Software - Roger Linn Design