Video Link: https://www.youtube.com/watch?v=aKosHRIn4x0

Fully refurbished and upgraded Perkin-Elmer 4410 Sputtering Deposition Systems
http://www.allwin21.com Allwin21 Corp. focuses on and professionally provides the following fully refurbished or rebuilt sputtering equipment with high Quality,right Cost,quick Delivery and excelent Service for Semiconductor industry,MEMS, Biomedical, Nanotechnology,Solar,LEDs etc. AccuSputter AW 4450 | Perkin Elmer 4450 | Perkin Elmer 4410 | Perkin Elmer 2400 Perkin-Elmer #39;s Model 4410 delta cathode production sputtering system is designed for high yield in production environments demanding maximum throughput for metal deposition. It also provide a high level of flexibility in process control for other materials. The 4410 uses a delta-shaped cathode that eliminate the need for a large-area uniformity-shaping aperture. This dramatically increases throughput while maintaining high wafer-to-wafer uniformity. Contrasted with circular cathodes, target utilization is substantially higher. Up to 35% of the target can be sputtered before target change, and some 60% of the sputtered material actually reaches the substrate pallet. This results in a lower cost per wafer and less frequent target changes. Up to three delta or 8-inch round targets may be installed for sequential deposition of three different materials without breaking vacuum. The 4410 employs a fast cycle load lock, two-stage cryopump and full flood Meissner trap to maintain the process chamber at high vacuum and in a clean condition at all times. The process chamber is fabricated of stainless steel for contamination-free ...From:sputterdepositionViews:0 0ratingsTime:01:28More inScience Technology

Continued here:

Fully refurbished and upgraded Perkin-Elmer 4410 Sputtering Deposition Systems - Video