Our strategy drew inspiration from our electrochemical hypervalent iodine-mediated syn-difluorination of alkenes14, where two fluorides sequentially invert a proposed iodonium intermediate (Fig. 1d). Electrochemical oxidation of iodotoluene provides a controllable and sustainable method for the generation of the difluoro(tolyl)-3-iodane (IF2) mediator. Switching the electrochemical oxidation off and then adding in the substrate (ex-cell approach) was found to better facilitate tolerance to oxidatively sensitive substrates that contain electron-rich functionality14,22,23,24. This is because there is no residual oxidant in solution to decompose the substrate. Wishing to exploit the same electron-rich chemical space, we adopted the ex-cell electrochemical method for generating IF2 and deliberately chose oxidatively sensitive 1a as the model substrate (Fig. 2a). This substrate deliberately contains an unactivated acyclic internal alkene, which is an underexplored alkene-type in fluoro- or chloro-functionalization reactions25,26,27,28,29,30. Adapting our difluorination conditions by adding an excess of various R4N+ chloride salts to a solution of 1a and IF2 in 5.6HF:amine (1:1 (v/v) mixture of 3HFNEt3 and 9HFpy) in dichloromethane (DCM)hexafluoroisopropanol at room temperature led predominately to alkene dichlorination. Without hexafluoroisopropanol, the use of 1equiv. of chloride provided more selective conditions but, surprisingly, not for the expected syn-addition product, 1d or 1e, rather to the anti-addition product, 1b. Nevertheless, we observed six out of the eight possible products (1g and 1h were not observed) (Fig. 2a), confirming the substantial challenge of controlling chemo-, regio-, and diastereoselectivity in the reaction.

For full details, see Supplementary Tables 15. a, Challenges with NuNu chlorofluorination to control chemo-, regio- and diastereoselectivity. Reaction of model compound 1a to products 1bi (n/o, not observed) using the ex-cell electrochemical approach. b, Chemoselectivity with different chloride sources. c, Temperature dependence on regioselectivity for anti-addition. d, Diastereoselectivity switch with changing nHF:amine ratio. e, A summary of the diastereoselectivity switch. IF2 generation: p-iodotoluene in 5.6HF:amine and DCM (13mA, 2.2F, divided cell, Pt||Pt). Anti conditions: alkene (0.6mmol), IF2 (1 equiv.) solution in 5.6HF:amine, NEt4Cl (1 equiv., 0.2 equiv.h1), DCM, 46C, 16h; syn conditions: alkene (0.6mmol), IF2 (1 equiv.) solution in 5.6HF:amine adjusted to 7HF:amine, NEt4Cl (1 equiv., 0.2 equiv.h1), DCM, 46C, 16h.

A range of different chloride salts were tested (Fig. 2b); chloride with inorganic cations led to more dichlorination, and more soluble organic cations led to greater selectivity for chlorofluorination, with NEt4Cl giving the highest yield (Supplementary Table 1). The regioselectivity of the anti-addition product could be improved by lowering the temperature, with 46C (CO2(s) in MeCN) providing the best balance of selectivity and yield (Fig. 2c). By adding chloride slowly, the competing dichlorination could be attenuated, leading to an optimized 85% yield of the anti-addition product 1b with a regioisomeric ratio (r.r.) of 12:1 (Fig. 2e).

During these efforts, product 1d from syn-chlorofluorination was only observed in trace quantities (<5%). However, when we started to increase the nHF:amine ratio beyond 5.6 (by adding 9HFpy to the 5.6HFamine mixture), the diastereoselectivity started to shift. A range of nHF:amine ratios were tested (Fig. 2d), which revealed the mechanism could be flipped with this highly sensitive trigger; increasing the ratio from just n=5.6 to just 7 was sufficient to completely switch the diastereoselectivity, yielding the syn-addition product 1d in good yield and excellent r.r. (Fig. 2e). Although the selectivity enhancement was maintained at ratios above 7HF:amine, the yield dropped, and therefore, optimized conditions for the syn-chlorofluorination of internal, unactivated alkenes remained with 7HF:amine (Supplementary Table 4).

To explore the generality of the reaction, a wide selection of alkene substrates was probed under the conditions (Table 1). Terminal alkenes transformed efficiently under the anti-addition 5.6HF:amine conditions, giving good to excellent yields and selectivity for the 1-chloro-2-fluoro products (nj). Oxidizable functionalities, such as secondary and tertiary amines, alcohols, anilines and styrenes and more complex molecules, were all well tolerated. Remarkably, the expected 1-chloro-2-fluoro (nj) regioselectivity was not observed for the cinchonine 11a, as the 1-fluoro-2-chloro regioisomer 11k preferentially formed, which is probably due to the internal position being sterically more inaccessible than all other substrates.

The anti-chlorofluorination conditions were then successfully applied to a broad range of internal alkenes, including cis and trans acyclic and cyclic alkenes, as well as substituted and electron-poor alkenes (Table 1). Although oxidants (Selectfluor and meta-chloroperoxybenzoic acid) previously used for IF2 formation were found to be inferior (Supplementary Table 8), we found that commercially available (bis(trifluoroacetoxy)iodo)benzene (PIFA) led to only a small drop in yield (73% versus 85% for 1b), which represents a practical alternative to electrochemically generated IF2. Oxidizable and acid-sensitive (29b, 34b and 35b) functional groups were well tolerated, and the yields were good to excellent in all cases. High regioselectivity was observed with fluoride placed on the site best able to stabilize a positive charge, hence, further away from electron-withdrawing groups. Exquisite regioselectivity was observed even four bonds away from a tertiary amine (27b). When there are competing factors for positive charge stabilization (24b) or the alkene is more remote (23d), then the regioselectivity decreases or disappears. Biologically relevant compounds were also transformed, including glucal derivative 35b and cholesterol 28b. Finally, a multigram scale-up of 39b was successfully demonstrated.

Previously reported chlorofluorination conditions are ENu methods that combine an N-chloro electrophilic chlorine reagent (N-chlorosuccinimide (NCS)31,32,33,34, trichloroisocyanuric acid (TCCA)35, N-chlorosaccharin36) with a source of HF37, and all lead to exclusive anti-addition. With few exceptions32, these conditions are demonstrated on limited compound classes, for example, styrenes, and without complex functionality, especially that which is easily oxidized. Hence, we were intrigued to test the complementarity to our NuNu system on substrates containing more varied functionality and alkene-types (Table 1). In all cases, isolated yields from our NuNu conditions proved superior to the nuclear magnetic resonance (NMR) yields from reported procedures, including both cis and trans internal alkenes, electron-poor alkenes and terminal alkenes. The regioselectivity either matched or was superior to the reported conditions.

The scope of the alkene syn-chlorofluorination reaction was then probed (Table 2). Various hetero-cyclic and aliphatic homo-allylic amines afforded the desired products in moderate to very good yields, with excellent tolerance for oxidatively sensitive functional groups. Cis alkenes underwent the syn-addition with generally higher efficiency than trans alkenes
(40d versus 40b). When the yields are moderate, oxidative decomposition probably competes. The anti-addition pathway was strongly attenuated under these conditions, which ensured the diastereoselectivity was excellent throughout. The regioselectivity was also excellent, with an overwhelming preference for the chloride to be placed nearest to nitrogen. Finally, ester 38a also underwent the syn-chlorofluorination.

To rationalize the synthetic results and, in particular, the origin for the regioselectivity and the intriguing switch in diastereoselectivity, we conducted a series of mechanistic experiments. Using 40a as a model substrate, alkene activation with iodane was calculated to occur most favourably by forming an iodine(III) complex, as opposed to the commonly invoked iodonium intermediate (Supplementary Fig. 42)38. To identify the specific iodane species responsible for each mechanism, we calculated energetic barriers for iodine(III) complex formation (Fig. 3a). IFCl was found to have the lowest energy barrier for alkene activation, whereas the transition state with ICl2 is completely inaccessible at 46C. The enhanced reactivity of IFCl over IF2 and ICl2 was also supported by charge and orbital coefficient calculations (Supplementary Fig. 48 and Supplementary Table 18). These findings were consistent with experimental reactivity studies using preformed iodanes (Fig. 3b). When a sample of ICl2 was applied to 1a under the anti conditions (Fig. 3b1), only trace product 1b was formed, confirming that ICl2 cannot be an active iodane and a more reactive species is required. However, when a 50:50 mixture of ICl2 and IF2 was used in the reaction the reactivity switched back on and product 1b formed readily (Fig. 3b2). These stoichiometries support IFCl to be responsible for anti-addition, which is notable considering fluoro-chloro-aryl iodanes have extremely limited presence in literature, with only one report proposing it as a potential intermediate39, in contrast to aryl dichloroiodanes, which are established reagents for alkene dichlorination15,40,41,42. Speciation studies (1H NMR; Supplementary Figs. 26 and 27) of IF2 with added NEt4Cl (01equiv.) and IF2 mixed with ICl2, conducted at 46C, revealed the appearance of a new species that we propose is consistent with the formation of IFCl. Density functional theory (DFT) calculations modelled at 46C also demonstrated IFCl was readily accessible from either IF2 or ICl2 via two possible mechanisms (Supplementary Figs. 51 and 52 and Supplementary Scheme 5).

a, DFT calculations modelled at 46C of iodine(III) complex formation, showing IFCl is the most reactive. Level of theory: M06-2X/6-31+G(d)/LANL2DZ(I)+SMD(CH2Cl2)//M06-2X/def2-TZVP+SMD(CH2Cl2). b, Reactivity studies using preformed samples of IF2 and ICl2 to establish the active iodane under each set of conditions. Anti-addition to 1b is not observed with ICl2 alone but is with 50:50 IF2:ICl2, providing evidence for IFCl to be the active iodane for anti-addition. Syn-addition to 1d does not predominate in the presence of ICl2 and only forms with IF2, providing evidence for IF2 to be the active iodane for syn-addition. c, Natural Bond Orbital (NBO) calculations (DFT) of iodine(III) complex to establish regioselectivity of nucleophile attack. d, Consideration of which halide attacks first. For syn-addition, fluoride attacks first and for anti-addition, chloride attacks first. eg, Anti-addition mechanisms discounted due to unfavourable transition state energies. The energies refer to the following starting materials: 40a in e, cis-but-2-ene in f, 40a in g. h, DFT calculations for the proposed mechanism for anti-addition, which shows a favourable transition state energy for a 1,2-chloride shift.

Under syn-conditions, the active iodane cannot be IFCl, considering anti-addition predominated with a 50:50 mixture of ICl2 and IF2 (Fig. 3b3). Syn-addition occurred only when IF2 was used with slow addition of chloride (Fig. 3b4), indicating IF2 to be the active species. As it is established syn-difluorination occurs through IF212,13,38, we reasoned the levels of difluorination (in the absence of chloride) should mirror those of syn-chlorofluorination (in the presence of chloride) when the nHF:amine ratio is altered. Indeed, a direct match of products 1i and 1d is observed (Supplementary Fig. 40), with 7HF:amine giving the highest yields of both products, suggesting IF2 to be the active iodane for syn-chlorofluorination. An explanation for the current limitation of syn-chlorofluorination to homo-allylic amines was revealed by DFT calculations of iodine(III) complex formation with IF2 (Supplementary Fig. 49); while a barrier of 19.2kcalmol1 was calculated for homo-allylic amine, which is approaching the limit of accessibility at 46C, a barrier of 23.3kcalmol1 was calculated for the corresponding bis-homo allyl amine, which is inaccessible.

To understand the regioselectivity, we undertook natural population analysis calculations (Fig. 3c). A clear difference in charge distribution between the alkenyl carbons is indicated, with the carbon distal to nitrogen more electropositive and, therefore, more reactive towards nucleophilic attack. Transition state calculations predict fluoride and chloride attack onto activated alkene 48aIF2 to be rapid and facile (Supplementary Fig. 47). Hence, we propose syn-addition occurs when fluoride attacks first, followed by a subsequent chloride attack (Fig. 3d).

Formation of the anti-addition product is less obvious. Although chloride attack onto the more electropositive distal carbon occurs very readily and with a low barrier to form INT1 (Fig. 3c and Supplementary Fig. 47), this was initially discounted because it is not consistent with the observed major regioisomer, which places chloride on the proximal carbon. Several inferred mechanisms in literature were considered, including direct chloronium formation, that is, alkene attack of a Cl+ equivalent (Fig. 3e)41,43, syn-ligand-coupling with fluoride attacking first (Fig. 3f)44 and syn IX addition followed by fluoride or chloride attack (Fig. 3g)45,46,47,48. In each case, we considered different chlorinated or fluorinated iodanes and coordinated HF environments (Supplementary Figs. 4447). Of these pathways, only the syn IF addition pathway (Fig. 3g) was found to be energetically feasible. However, this pathway was discounted, because the competing chloride attack on the iodine(III) complex to form the chlorinated-iodanated intermediate (INT1) is far more favourable (Supplementary Fig. 47). A kinetically accessible transition state from INT1 was located for a 1,2-chloride shift with Brnsted acid (HF) activation of the fluoride nucleofuge (Fig. 3h and Supplementary Fig. 43). Incipient chloronium formation through displacement of the iodane (from INT1 to INT2) is followed by very rapid and exergonic attack by fluoride (TS2). Although this pathway for chloronium formation has been offered as a potential mechanism for alkene dihalogenation4, to the best of our knowledge, no examples with theoretical or experimental evidence have been reported. Hence, our proposed pathway for anti-addition is consistent with the observed regio-, chemo-, and diastereoselectivity, the barrier height is consistent with the observed reaction rates, and it is the only pathway that can explain the formation of each iso
mer of compound 35b (Supplementary Figs. 3639).

Since the identity of the halide that attacks the iodine(III) complex first is diastereo-determining, we were inspired to understand how the reaction conditions differed to facilitate this. Hence, several fundamental physical characteristics were measured of the 5.6 and 7.0HF:amine solutions, including the concentrations of fluoride (F) and HF (Fig. 4a). Despite distinct reaction outcomes under each set of conditions, only the equivalents of HF substantially differed. However, when the number of equivalents of HF in 5.6HF:amine were matched to that of 7.0HF:amine (that is, to 204), no syn-chlorofluorination was observed (Supplementary Table 13). Therefore, it cannot solely be the identity of the iodane and manipulation of the equilibrium between ICl2, IFCl and IF2 that dictates the diastereoselectivity.

a, Analysis of the physical characteristics of each medium, which do not show a substantial difference between them. b, Assessment of the difference in nucleophilicity of fluoride in 5.6HF:amine and 7.0HF:amine by measuring the kinetics of the fluorination of p-nitrobenzyl bromide in each medium. The lines through plotted data are modelled second order fits. c, Assessment of the difference in nucleophilicity of chloride in 5.6HF:amine and 7.0HF:amine by measuring the kinetics of a chlorination reaction in each medium, which shows a lower nucleophilicity in 7.0HF:amine. The lines through plotted data are modelled second order fits. d, A diastereoselectivity switch can be achieved by controlling the concentration of chloride. e, A summary of the diastereodivergent NuNu alkene chlorofluorination mechanisms. The bifurcation of mechanisms is dependent on the concentration and the relative nucleophilic activity of chloride and fluoride ions, which in turn dictates the structure and reactivity of the iodane, which halide adds first to the alkene, and the mechanism of iodane displacement.

The relative nucleophilicities of chloride and fluoride were next compared under both sets of conditions by measuring bimolecular nucleophilic substitution displacement rates in appropriately chosen transformations. The rate of reaction between p-nitrobenzyl bromide and fluoride proceeded at similar rates in both HF:amine solutions (Fig. 4b), indicating that fluoride has a similar nucleophilicity under each conditions. However, when chloride competes with fluoride in the substitution of n-butyl mesylate under both sets of conditions, the rate of chlorination was found to be 3.6 times faster in 5.6HF:amine compared with 7.0HF:amine, and no fluorinated product was observed (Fig. 4c). Nucleophilicity calculations of chloride and fluoride ion clusters also mirror these experimental observations (Supplementary Figs. 5355). Combined, these data suggest that the dampened nucleophilicity of chloride in 7.0HF:amine promotes syn-chlorofluorination by allowing fluoride to add first, but in 5.6HF:amine, chloride has higher nucleophilicity and promotes anti-chlorofluorination by adding first.

Increasing the chloride concentration in 7.0HF:amine, via a single portion addition at the reaction outset, reversed the product outcome back to anti-addition product 1b (Fig. 4d). This evidence adds further support to the diastereodivergence being controlled by which nucleophile attacks first; if chloride is in sufficiently high concentration or is sufficiently nucleophilic, then the more reactive IFCl is formed, and chloride can attack the alkene first, resulting in anti-chlorofluorination via a 1,2-chloride shift. Otherwise, fluoride adds first to an IF2-activated alkene and syn-chlorofluorination is achieved, following nucleophilic substitution by chloride (Fig. 4e).

In summary, we have developed a NuNu strategy for the chlorofluorination of unactivated alkenes, which selectively gives either anti- or syn-addition. Good to excellent yields of products, including those that are electron-rich and readily oxidizable, are provided with very high regio-, chemo- and diastereoselectivity. A simple switch was discovered for transitioning between anti-and syn-chlorofluorination based on the HF:amine ratio used in the solution. Mechanistic studies revealed that different iodanes promote each pathway but that the identity of the halide adding to the alkene first is diastereo-determining, with fluoride leading to syn-addition and chloride leading to anti-addition. The anti-addition pathway follows an unusual 1,2-chloride shift followed by rapid fluoride addition from iodane. These results represent an important advance in the application of hypervalent iodine for the vital elaboration of fluorinated motifs in an ever-expanding chemical landscape, and show how capitalizing on a subtle and simple variation of reaction solvent composition can influence product selectivity.

More here:
Diastereodivergent nucleophilenucleophile alkene chlorofluorination - Nature.com