Nano Utica inspires students at local technology show

Story Created: Mar 13, 2014 at 6:21 PM EDT

Story Updated: Mar 13, 2014 at 6:30 PM EDT

MARCY, N.Y. (WKTV) -- If you're into science and technology, it's an exciting time to be in Utica.

Middle and high school students from all over Upstate New York gathered to show off their technology projects at the 13th annual Technology Education Showcase at SUNY IT Thursday.

Students also took part in carbon dioxide car races and junkyard wars.

"A hands on approach to learning, critical thinking, problem solving, it's just an overall great event," said Chris Jensen, a technology instructor at Whitesboro High School.

Beyond team work and collaboration, SUNY IT's outreach coordinator says the tech show also stresses the importance of Science Technology Engineering and Math or rather, STEM-based learning.

"In Utica in particular STEM is going to be everyone's ticket for economic success and that's because for example, Nano Utica is going to bring so many jobs to this region," said Elizabeth Rossi, K-12 outreach coordinator at SUNY-IT.

At the tech show, students can see a small scale version of Nano Utica's cleanroom being built right at SUNY-IT. You can even step into a clean suit and feel what it would be like to work at Nano Utica. Many students at the tech show hope that may one day be reality.

"That's one of the reasons I want to go to SUNY IT- it's close to home and this big nano tech center. I want to become an engineer that's a big part of- civil, nano tech engineering, electrical engineering so they're going to be looking for so many people to work in that building," said Michael Palmieri, a senior at Whitesboro High School.

View original post here:

Nano Utica inspires students at local technology show

Nanoscale Optical Switch Breaks Miniaturization Barrier

Contact Information

Available for logged-in reporters only

Newswise NASHVILLE, Tenn. An ultra-fast and ultra-small optical switch has been invented that could advance the day when photons replace electrons in the innards of consumer products ranging from cell phones to automobiles.

The new optical device can turn on and off trillions of times per second. It consists of individual switches that are only one five-hundredths the width of a human hair (200 nanometers) in diameter. This size is much smaller than the current generation of optical switches and it easily breaks one of the major technical barriers to the spread of electronic devices that detect and control light: miniaturizing the size of ultrafast optical switches.

The new device was developed by a team of scientists from Vanderbilt University, University of Alabama-Birmingham, and Los Alamos National Laboratory and is described in the Mar. 12 issue of the journal Nano Letters.

The ultrafast switch is made out of an artificial material engineered to have properties that are not found in nature. In this case, the metamaterial consists of nanoscale particles of vanadium dioxide (VO2) a crystalline solid that can rapidly switch back and forth between an opaque, metallic phase and a transparent, semiconducting phase which are deposited on a glass substrate and coated with a nanomesh of tiny gold nanoparticles.

The scientists report that bathing these gilded nanoparticles with brief pulses from an ultrafast laser generates hot electrons in the gold nanomesh that jump into the vanadium dioxide and cause it to undergo its phase change in a few trillionths of a second.

We had previously triggered this transition in vanadium dioxide nanoparticles directly with lasers and we wanted to see if we could do it with electrons as well, said Richard Haglund, Stevenson Professor of Physics at Vanderbilt, who led the study. Not only does it work, but the injection of hot electrons from the gold nanoparticles also triggers the transformation with one fifth to one tenth as much energy input required by shining the laser directly on the bare VO2.

Both industry and government are investing heavily in efforts to integrate optics and electronics, because it is generally considered to be the next step in the evolution of information and communications technology. Intel, Hewlett-Packard and IBM have been building chips with increasing optical functionality for the last five years that operate at gigahertz speeds, one thousandth that of the VO2 switch.

Vanadium dioxide switches have a number of characteristics that make them ideal for optoelectronics applications, said Haglund. In addition to their fast speed and small size, they:

Read the rest here:

Nanoscale Optical Switch Breaks Miniaturization Barrier

Samueli Shares Success Story

Dr. Henry Samueli, Broadcom co-founder and chief technology officer gave his annual discourse, The Story of Broadcom How a UCLA Professor Became a Successful Entrepreneur on Thursday, March 6 in the McDonnell Douglas Engineering Auditorium as part of the Winter Entrepreneurship Seminar Series hosted by the department of engineering. As an alumnus and former professor of electrical engineering at UCLA, Dr. Samueli continues to vocally and financially support the engineering sciences of UCLA and, more visibly, of UCI.

Broadcom, which is headquartered in Irvine, has designed and developed semiconductors for the electronics communication industry since 1991. It was a point of pride for the co-founder to state that nearly 99.98 percent of all internet traffic crosses at least one Broadcom chip.

To introduce the background of telecommunications, Dr. Samueli stated the fact that there are more connected devices today than people, with over 7 billion connected devices today. Yet, Dr. Samueli maintained that none of this technology would have developed without the invention of the semiconductor, which he believes has created more impact on society, than any other invention in the past 100 years.

A semiconductor is the core material of all electronic circuits, presently composed of silicon (hence the Bay area nickname, Silicon Valley), which works simultaneously as a conductor and insulator of electricity. Their function was critical to the invention of transistors in the 1950s, which expedited the relay of information through electronic waves and current. Without these advancements, the modern computer would have never come into existence.

Accompanied by friendly graphs and slideshow animations, Dr. Samueli explained the incredible pace of semiconductor advancements, which are patterned on processor chips with increasing efficiency and parvitude.

I dont know if there is any industry in the world, at any time, of any kind, that has seen a factor of a million improvement, ever, or even in a 40 year window.

Yet he did not believe the exponential growth could sustain itself for much longer.

The bottom line is Moores law is slowing down, and coming to an end, he stated. My estimate is in the next 10 to 15 years.

He continued to explain limitations and inventions in the 80s and 90s and at one point elicited laughter from the audience, when his slideshow interjected with the tinny beeps and ringing of the notoriously slow internet modem dial-up connection process.

When people saw that brick wall of limitations, thats kind of when Broadcom entered the market, Dr. Samueli said.

Read more from the original source:

Samueli Shares Success Story

Creating a Graphene-Metal Sandwich to Improve Electronics

UC Riverside and University of Manchester researchers combine graphene and copper in hopes of shrinking electronics

By Sean Nealon on March 11, 2014

Pradyumna Goli, left, and Alexander Balandin in Balandin's Nano-Device Laboratory.

RIVERSIDE, Calif. (www.ucr.edu) Researchers have discovered that creating a graphene-copper-graphene sandwich strongly enhances the heat conducting properties of copper, a discovery that could further help in the downscaling of electronics.

The work was led by Alexander A. Balandin, a professor of electrical engineering at the Bourns College of Engineering at the University of California, Riverside and Konstantin S. Novoselov, a professor of physics at the University of Manchester in the United Kingdom. Balandin and Novoselov are corresponding authors for the paper just published in the journal Nano Letters. In 2010, Novoselov shared the Nobel Prize in Physics with Andre Geim for their discovery of graphene.

In the experiments, the researchers found that adding a layer of graphene, a one-atom thick material with highly desirable electrical, thermal and mechanical properties, on each side of a copper film increased heat conducting properties up to 24 percent.

This enhancement of coppers ability to conduct heat could become important in the development of hybrid copper graphene interconnects for electronic chips that continue to get smaller and smaller, said Balandin, who in 2013 was awarded the MRS Medal from the Materials Research Society for discovery of unusual heat conduction properties of graphene.

Whether the heat conducting properties of copper would improve by layering it with graphene is an important question because copper is the material used for semiconductor interconnects in modern computer chips. Copper replaced aluminum because of its better electrical conductivity.

Downscaling the size of transistors and interconnects and increasing the number of transistors on computer chips has put an enormous strain on coppers interconnect performance, to the point where there is little room for further improvement. For that reason there is a strong motivation to develop hybrid interconnect structures that can better conduct electrical current and heat.

From left: (1) copper before any processing, (2) copper after thermal processing; (3) copper after adding graphene.

Read more:

Creating a Graphene-Metal Sandwich to Improve Electronics

Stevens Institute of Technologys School of Engineering Relaunches its Online Research Magazine

Hoboken, NJ (PRWEB) March 11, 2014

Stevens Institute of Technology announces the relaunch of Nexus, the universitys online research magazine for the Charles V. Schaefer, Jr. School of Engineering & Science, http://research.stevens.edu/.

Nexus is a place for people interested in learning more about engineering research and news in four major research areas including: energy & environment; systems & security; nano-technology & multiscale; and biomedical & health. The Spring issue is the first to showcase a new site design thats more visual and user-friendly and includes more technical research articles than before.

Readers want and need to see a more complete picture of how much good work is happening in the School of Engineering and Science, says Michael Bruno, Feiler Chair Professor and Dean, School of Engineering and Science. Nexus serves as the window into our research for the campus community, our external partners, journalists, and our alumni.

Each issue focuses on a topic or domain area that is of current national/global interest, or that highlights an emerging area of strength within the School. The Spring issue is centered on the issue of information assurance or privacy and the work of Stevens researchers in this area.

Readers will fine the new Nexus chock full of useful and interesting information about our research programs and people.

This online newsletter offers readers:

Don't worry, if you've already signed up for Nexus, you'll keep receiving it each quarter. If you haven't signed up for it yet, you can do so here: http://research.stevens.edu/subscribe-nexus.

A Sneak Peak into Nexus Spring 2014 Issue

As the digital age has transformed our lives for the better, connecting us in ways unimaginable only 10 years ago, so, too, has it ushered in an era of widespread concern for the safety and security of these connections, and the privacy on which so much of our personal and professional lives depend.

Read more:

Stevens Institute of Technologys School of Engineering Relaunches its Online Research Magazine

How an Entrepreneurial Engineering Education Nurtured a Biotech Startup

Contact Information

Available for logged-in reporters only

Newswise Identify a real-world problem. Engineer a solution. And, if the solution works, figure out how it can be commercially viable. Thats what Michael Benchimol said he learned over 7 years of working in the laboratory of Sadik Esener, a professor in the departments of NanoEngineering and Electrical and Computer Engineering at the University of California, San Diego. In Benchimols (Ph.D., Electrical Engineering, 12) case, it specifically means building a company to advance a targeted drug delivery platform that could make chemotherapy more effective and less toxic to the healthy tissue in the body.

I like to build things. Thats the engineering side of me, said Benchimol, who also earned a masters in electrical engineering at UC San Diego in 2008. Creating a company was just a different form of creating something from nothing. I always had that interest and I saw that there was an opportunity here.

The opportunity is a method of delivering chemotherapy drugs directly to cancerous tumors in the body, a longtime goal of next generation cancer therapy research due to the toxic effects the drugs can have on the rest of the body. The field is enjoying a research heyday in part thanks to advances specifically in the area of nanotechnology. Benchimol says nanotechnology is enabling cancer researchers to leverage the best properties of cancer drugs and biocompatible materials, in a single therapy that can circulate undetected by the body's immune system.

His company, Sonrgy, recently entered an exclusive licensing agreement with UC San Diego to further develop the companys technology, which resulted from his Ph.D. and postdoctoral research at the Jacobs School of Engineering and UCSD Moores Cancer Center, where Esener, also directs the NanoTumor Center. Benchimols solution is unique in that it doesnt rely on tumor receptors that the nanoparticle can seek out and stick to before releasing the drug. Rather, the Sonrgy platform, called SonRx, uses nanocarriers smaller than human cells that carry chemotherapy drugs through the body where they can be released at the tumor site by a doctor deploying ultrasound. The technology is in the preclinical stage.

"The SonRx technology addresses longstanding challenges related to stability and controlled release in nano-scale drug delivery," said Michael Benchimol, who is Sonrgy's Chief Technology Officer, in a company statement about the licensing agreement.

The company is fleshing out its management team and bringing on talent with pharmaceutical experience and expertise in the drug development process.

Benchimol said working in the laboratory of a successful inventor and entrepreneur provided essential support as he explored whether his idea had both scientific merit and commercial potential.Professor Esener enforced these concepts early on in my Ph.D. program, said Benchimol.

Along the way, Benchimol used the resources and programs available to entrepreneurially minded students to guide his path. At Research Expo, the annual technology showcase of the Jacobs School of Engineering, Benchimol presented earlier versions of his targeted chemotherapy program to a panel of judges drawn from faculty, alumni and industry.

The rest is here:

How an Entrepreneurial Engineering Education Nurtured a Biotech Startup

UT Dallas Professor Receives Funding to Design Materials Inspired by Bone

Contact Information

Available for logged-in reporters only

Newswise Dr. Majid Minary, an assistant professor of mechanical engineering at UT Dallas, has received funding to design high-performance materials inspired by bone.

The Young Investigator Research Program (YIP) grant from theAir Force Office of Scientific Research (AFOSR) could eventually lead to the creation of a material that can reinforce itself at points of high stress for use in airplanes and other defense applications. The YIP program provides $360,000 over three years.

The YIP is open to scientists and engineers at research institutions across the United States who received their PhD in the last five years and who show exceptional ability and promise for conducting basic research.

Materials and structures that self-reinforce, repair and heal are of importance for developing vehicles and machines for use in defense and security, said Dr. Mario Rotea, head of the Department of Mechanical Engineering in the Erik Jonsson School of Engineering and Computer Science and holder of the Erik Jonsson Chair. Nature uses evolution to develop these capabilities. Dr. Minary is one of a handful of young engineers and scientists who seek to uncover fundamental mechanisms of nature and combine them with engineering principles to develop these capabilities in man-made systems. This YIP award certifies Dr. Minarys vision and skill set, and acknowledges the quality and applicability of his work to problems of relevance to the [Air Force].

The AFOSR awarded 42 grants from more than 230 applicants who submitted proposals for YIP in this round of competition. Minary is one of two current Jonsson School faculty members to receive the award this year. Cybersecurity expert Dr. Zhiqiang Lin, assistant professor of computer science, also received a grant.

Human bone has been one of the major sources for bio-inspired design for man-made materials. Its been known for decades that human bone has the ability to remodel itself. For example, bone in the dominant arm of a tennis player often weighs more than bone in the other arm, and medical clinicians often prescribe weight-bearing exercises to heal fractured bones.

Whats less clear are the fundamental mechanisms behind the remodeling. Based on his prior research, Minary will investigate the piezoelectricity (how pressure forms electric charges) of the fibers of collagen inside bones. Collagen is the most abundant protein in the human body it contributes to smooth skin and is a building block for muscles, tendons and bones.

My prior work showed that it is actually the collagen fibers in bone that have the piezoelectric property that allows bone to rebuild itself, said Minary, also a member of the Alan G. MacDiarmid NanoTech Institute at UT Dallas. Now we want to see if we can learn from this property and make synthetic materials that act in similar ways as the collagen fibers.

Continue reading here:

UT Dallas Professor Receives Funding to Design Materials Inspired by Bone

Engineering team increases power efficiency for future computer processors

10 hours ago A picture of spin wave devices, showing magneto-electric cells used for voltage-controlled spin wave generation in the spin wave bus material (yellow stripe). The yellow stripe is about four micrometers in diameter.

(Phys.org) Have you ever wondered why your laptop or smartphone feels warm when you're using it? That heat is a byproduct of the microprocessors in your device using electric current to power computer processing functionsand it is actually wasted energy.

Now, a team led by researchers from the UCLA Henry Samueli School of Engineering and Applied Science has made major improvements in computer processing using an emerging class of magnetic materials called "multiferroics," and these advances could make future devices far more energy-efficient than current technologies.

With today's device microprocessors, electric current passes through transistors, which are essentially very small electronic switches. Because current involves the movement of electrons, this process produces heatwhich makes devices warm to the touch. These switches can also "leak" electrons, making it difficult to completely turn them off. And as chips continue to get smaller, with more circuits packed into smaller spaces, the amount of wasted heat grows.

The UCLA Engineering team used multiferroic magnetic materials to reduce the amount of power consumed by "logic devices," a type of circuit on a computer chip dedicated to performing functions such as calculations. A multiferroic can be switched on or off by applying alternating voltagethe difference in electrical potential. It then carries power through the material in a cascading wave through the spins of electrons, a process referred to as a spin wave bus.

A spin wave can be thought of as similar to an ocean wave, which keeps water molecules in essentially the same place while the energy is carried through the water, as opposed to an electric current, which can be envisioned as water flowing through a pipe, said principal investigator Kang L. Wang, UCLA's Raytheon Professor of Electrical Engineering and director of the Western Institute of Nanoelectronics (WIN).

"Spin waves open an opportunity to realize fundamentally new ways of computing while solving some of the key challenges faced by scaling of conventional semiconductor technology, potentially creating a new paradigm of spin-based electronics," Wang said.

The UCLA researchers were able to demonstrate that using this multiferroic material to generate spin waves could reduce wasted heat and therefore increase power efficiency for processing by up to 1,000 times. Their research is published in the journal Applied Physics Letters.

"Electrical control of magnetism without involving charge currents is a fast-growing area of interest in magnetics research," said co-author Pedram Khalili, a UCLA assistant adjunct professor of electrical engineering. "It can have major implications for future information processing and data-storage devices, and our recent results are exciting in that context."

The researchers previously applied this technology in a similar way to computer memory.

Read the original post:

Engineering team increases power efficiency for future computer processors

Cuomo: DeWitt hub for nano industries will create at least 350 high-tech jobs

SYRACUSE New York Governor Andrew Cuomo on Tuesday night announced plans for a facility in DeWitt that will serve as a hub for emerging nano industries in Onondaga County and its first tenant.

Cuomo made the announcement during his visit for Onondaga County Executive Joanie Mahoneys State of the County address at the Carnegie Library in downtown Syracuse.

The DeWitt facility will specialize in providing advanced visual-production research and education to support upstate New Yorks rapidly growing film and television industry, the governors office said in a news release.

The State University of New York (SUNY) College of Nanoscale Science and Engineering (CNSE) will lead the operation. It will focus on the use of nanotechnology to drive innovations in the computer-generation imagery, animation, and motion-capture technology used in film and television production, Cuomos office said.

Cuomo also announced that The Film House, a Los Angelesbased film and television company, will be the facilitys first tenant. Itll move its headquarters, production, post-production, and distribution operations to DeWitt.

The project will create at least 350 new high-tech jobs and 150 construction jobs, according to the governors office.

The film industry and nanotech sectors are emerging industries, and New York is going to reap the rewards of innovation and high-tech jobs, Cuomo said in the news release.

Were bringing the industries of the future to New York, and Upstate is going to lead the way. The new innovation hub in Onondaga County will be a hotspot for research and education, bringing hundreds of new jobs and hundreds of millions of dollars of investment to Central New York, Cuomo said.

The project is based on a seven-year growth plan that includes a minimum private investment of over $150 million over the seven years, with an initial 125 jobs that will eventually grow to at least 350.

Here is the original post:

Cuomo: DeWitt hub for nano industries will create at least 350 high-tech jobs

Carbon Emerges as New Solar Power Material

Carbon-based photovoltaic devices might one day replace silicon solar cells

Flickr/Jeremy Levine

Researchers are investigating how carbon can harness the sun's light, potentially replacing more expensive and toxic materials used in conventional photovoltaic technologies.

Now a team at Stanford University has developed a solar cell whose components are made solely from carbon. The scientists published their findings last month in the journal ACS Nano.

"We were interested in forming basically a new type of solar cell in which the materials being used are all carbon materials," said Michael Vosgueritchian, a doctoral student in chemical engineering at Stanford and a co-author.

He explained that carbon materials have several traits that make them appealing to energy developers. "There's no fear of running out of carbon," Vosgueritchian said. "These materials, since they are nanomaterials, they are solution processable. They can be deposited by spraying and coating without high temperatures or vacuums."

Contrast this with typical silicon-based solar panels: Manufacturers need very pure silicon and have to heat it to high temperatures. The devices' electrodes often consist of expensive, rare or dangerous elements like cadmium, tellurium and indium. When a photovoltaic panel wears out, these chemicals also create a disposal hazard.

Working under Zhenan Bao at Stanford, Vosgueritchian said, the research team used several flavors of carbon to construct its device. Graphene, a carbon structure in which the atoms lie in thin sheets of hexagons, formed the anode.

If graphene is rolled into a cylinder, it becomes a carbon nanotube. Nanotubes made up part of the device's active layer, which converts light to electricity. On top was a layer of 60-carbon fullerenes, soccer-ball-shaped arrangements of atoms. The final layer was a cathode composed of nanotubes.

'A long way to go' before practical use Michael Strano, a professor of chemical engineering at the Massachusetts Institute of Technology, explained that this junction between nanotubes and fullerenes "represents a fundamentally new kind of solar cell." His team developed a device using this system and published its work in Advanced Materials in June.

Original post:

Carbon Emerges as New Solar Power Material

Cuomo: 52k sq. foot facility to bring nano technology and film production to DeWitt

Updated at 11:00 p.m. on Tuesday, March 4:

Syracuse (WSYR-TV) - Gov. Andrew Cuomo announced plans for a $15 million building in DeWitt that will be home to emerging nano industries and a California film production company.

Cuomo says the 52,000 square foot facility, which will be located at the Collamer Crossings Business Park in Dewitt, will be led by the College of Nanoscale Science and Engineering.

The governor says CNSE will focus on using nanotechnology to drive innovations in computer generation imagery, animation, and motion capture technology used in film and television production.

The building would also be the headquarters for the California film production company The Film House - and house the companys production, post-production, and distribution operations.

"Now who would've figured Hollywood comes to Onondaga. Right, you would've never guessed," Cuomo said. "It is highly lucrative work. It's not just the actors. It is the production. It is the onsite. It is the post-production. It's the film work. It's everything. It is a whole economy unto itself."

The project is expected to create at least 350 new high tech jobs and 150 construction jobs, according to the governor.

Onondaga County is currently working with the Syracuse International Film Festival to create an Onondaga County Film commission to support the growth of the film industry.

Cuomo says the commission will provide marketing, coordination and logistics to support film production in Onondaga County.

The project will include a minimum private investment of over $150 million over seven years, with an initial 125 jobs that is expected to increase to 350, according to Cuomo.

Continued here:

Cuomo: 52k sq. foot facility to bring nano technology and film production to DeWitt

CNY to become hub for film work

This section displays the last 50 news articles that were published.

Move over Hollywood. You'll soon be seeing more lights, cameras and action in Onondaga County. Central New York Emerging Nano-Industries hub was announced during Joanie Mahoney's State of the County address. Governor Cuomo attended as a special guest to make the announcement. Our Iris St. Meran tells us more about the impact and how this was all a welcomed surprised to those involved in film locally.

ONONDAGA COUNTY, N.Y. -- Governor Andrew Cuomo said, "Who would have ever figured, Hollywood comes to Onondaga."

Onondaga County that is. It will soon be the new Central New York Hub for Emerging Nano Industries. It's a public and private partnership led by the College of Nanoscale Science and Engineering

College of Nanoscale Science and Engineering Senior Vice President Alain E. Kaloyeros said, "A hub that begins with the film industry: Innovation, production, post production and distribution company."

It would be located at Collamer Crossings Business Park in DeWitt on vacant industrial land. Kaloyeros says New York will invest $15-million for phase one of construction: more than 100,000 square feet. The first anchor tenant is The Film House. The Film House looked at other parts of the country and the world but said this location was ideal.

The Film House Producer Ryan Johnson explained, "With New York's open for business, the tax situation, it's like 35%, plus no taxes, plus cost savings. Your savings on a budget of a movie could be 40-60% just off the top for being here."

And over seven years it's projected to bring $150-million and 350 jobs to the region. The opportunities are exciting for those involved in film locally.

"It's going to mean jobs. It's going to mean unions from Down State are going to have to train people to come up here to be crew members who will live here, send their kids to school and shop in our area. We'll have a whole new class of creative people," Syracuse International Film Festival Artistic Director Owen Shapiro.

And you can expect to see some of The Film House's work this year. Johnson says they plan to release three feature films this summer and eventually have on average 5 to 10 a year.

Visit link:

CNY to become hub for film work

Kester to co-direct nanoSTAR

Nano-medicine expert to improve cross-grounds collaboration for nano-research by Savannah Borders | Mar 02 2014 | 21 hours ago

Dr. Mark Kester will co-direct the Universitys Institute for Nanoscale and Quantum Scientific and Technological Advanced Research, the University announced last week. The institute, nicknamed nanoSTAR, uses both graduate and undergraduate students and provides opportunities for cross-school collaboration for University researchers.

An expert in nanomedicine, Kester was the inaugural director of the Penn State Center for NanoMedicine and Materials, as well as the former chair of pharmacology there. Kester was brought to the University at the beginning of the year as a pharmacology professor.

Dr. Stu Wolf, the current director of nanoSTAR, said he is excited to have Dr. Kester on board as a co-director because of the connections he brings that will help fulfill the institutes cross-discipline focus.

One of the real motivations of the center was to bring together people from the different schools, Wolf said. We provide funding to support faculty to do research in this area. The requirement for any faculty to receive funding is that they have to be collaborating with a faculty member from another school.

Wolf said Kesters connections will help foster a stronger relationship between engineering research and medical research.

The beauty of U.Va. is the Grounds themselves; the engineering and sciences are well-connected already to the college of medicine, Kester said. The NanoSTAR Institute is already formed at U.Va., and what I am looking forward to do is working with Stu Wolf and taking the NanoSTAR to the next level to rebrand and reinvent the nanoSTAR to truly have a strong medical and biomedical focus

Kester brings previous experience in large-scale research to his leadership role, particularly the sandbox model at Penn State, where engineers, research scientists and medical doctors collaborated to develop innovative and useful technologies.

The reason I came to U.Va. is really to expand and exploit all the great technology that are being developed across the ground at U.Va., Kester said, and to really take some of these new advances and new materials and new nano-technologies, and show they have a medical and biomedical applications.

Kester said materials take on new properties at a nanoscale. The exploitation of these properties allows for large advancements in useful treatments.

See the original post:

Kester to co-direct nanoSTAR

Contractors complete steel structure on Quad-C of Nano Utica project

MARCY Construction crews have completed the steel structure ahead of schedule in the construction of the $125 million computer-chip commercialization center (Quad-C). The office of New York Gov. Andrew Cuomo today acknowledged it in a news release as a key moment in the first phase of Cuomos $1.5 billion Nano Utica initiative.

The State University of New York College of Nanoscale Science and Engineering (SUNY CNSE) and the SUNY Institute of Technology (SUNYIT) are spearheading the effort.

Nano Utica is the public-private partnership that Cuomo announced last October thats intended to bring more than 1,500 jobs to the region.

Its also meant to further define New York as the global leader in nanotechnology-based research and development, Cuomos office said in the news release.

Not only will this project create over a thousand new high-skilled, high-paying jobs, but it marks New Yorks emergence as a world leader in the nanotechnology sector. Quad-C will be the catalyst for nanotechnology innovation, education, and economic development in New York. The project is ahead of schedule and exciting things lay ahead, Cuomo said in the news release.

Lt. Gov. Robert Duffy presided over the ceremony in Marcy.

With great thanks to Gov. Cuomos strategic vision for growth, the past three years have proven to be enormous for the nanotechnology industry in many regions of the state. The latest announcement here today in Utica, that construction on the Quad-C facility is ahead of schedule, helps to ensure the continued development and utilization of everything that the Mohawk Valley has to offer, Duffy said in the news release.

Crews will complete construction on Quad-C by the end of 2014, Cuomos office said.

The 253,000-square-foot facility will include 56,000 square feet of Class 1 capable clean-room space stacked on two levels.

An annual operating budget of over $500 million will support 1,500 high-tech jobs and the establishment of academic programs and cutting-edge workforce training opportunities.

More here:

Contractors complete steel structure on Quad-C of Nano Utica project

Uganda: Uganda's Cheap Bike Problem

The Nano is a small, cheap car manufactured by Indian multinational Tata. At a cost equivalent to US$2,000, it promised to offer personal transport to Indians who previously couldn't afford it. Though that may be true, last month The Guardian reported that the vehicle achieved a zero-star rating in crash tests conducted by Global NCAP, a UK-based safety assessor.

Overall, the article suggested that the car's poor performance may have been due to its 'frugal engineering'. This approach, intended to keep costs down, meant the vehicle had no air bags and "poor structural integrity".

Joseph Magoola, currently studying for a master's degree in public health at Makerere University in Kampala, Uganda, writes a regular blog on road safety in his country. He says that cheap, badly designed vehicles are causing deaths and misery in his country. But rather than cars, he singles out the motorbike taxis known as boda-bodas as his particular worry.

People use the bikes because they are designed to be affordable, fuel efficient and easy to manoeuvre through the city's traffic jams, Magoola tells me. But little attention is paid to safety, he says, either when the bike was designed, or by the police and government who should have implemented safety measures.

"They are totally not safe," he says. "The riders are reckless. They are not trained on how to use the bikes. There is nobody that regulates them, so whoever can buy one can use it on the roads."

Boda-bodas are becoming the leading cause of crashes on Kampala's roads, Magoola says. And he points me to research showing that more than 62 per cent of the surgery budget at the city's Mulago hospital is consumed treating people who have been in boda-boda accidents. [2]

Magoola says there have been several politically initiated safety campaigns in recent years, but none has been backed up by a "proper, long-term policy".

"We know what needs to be done: measures like speed humps, wearing helmets and separating pedestrians and motorbikes," he says. But, so far, politicians have failed to formalise a policy to put these ideas in place.

To try and put pressure on them, Magoola regularly takes to his keyboard. "The thinking behind my blog is to use it as an advocacy tool," he says.

References

Here is the original post:

Uganda: Uganda's Cheap Bike Problem

Why Ssangyong does not believe in frugal engineering

And aspires to be a premium brand in the SUV space across the world

February 27, 2014:

Yoo II Lee shakes his head when the topic veers around to frugal engineering. The President & CEO of SsangYong Motor Company clearly does not subscribe to this concept which has become some sort of a style statement in the automobile industry.

Frugal engineering is something I do not agree with because you cannot compete globally with this concept. Low cost from the point of savings is fine but this should not mean a low quality car, Lee told Business Line at the Delhi Auto Expo earlier this month.

As he puts it, frugal engineering may be accepted by very low-income groups. The SsangYong chief then brings up the example of China where one can only find top-end brands. Likewise, people in India are also looking for big cars like BMW and Audi. They want good performance, not cheap cars.

Origins

Frugal engineering became a fashionable term thanks to Carlos Ghosn, the charismatic CEO of Renault-Nissan. The roots perhaps go back to the time of the Tata Nano which hit the headlines nearly eight years ago with its unbelievable price tag of Rs 1-lakh. Ghosn made no bones about his admiration for this initiative and believes frugal engineering holds the key for automakers success quotient in emerging markets where price plays a big role in the buying decision.

Clearly, Lee is not on the same page and wants SsangYong to remain in a premium space with its SUVs. Its owner, Mahindra & Mahindra which acquired the company three years ago, focuses on a more realistic price spectrum since its home base, India, is one of the cost-competitive auto markets in the world.

Yet, the two have been working towards a successful partnership which saw 2013 register one of the best years for SsangYong with sales of nearly 1.5 lakh units. The target is to double this by the end of 2016 a remarkable turnaround for this Korean automaker which was literally in the dumps not-so-long ago.

Yet, there are critical gaps which need to be filled quickly if SsangYong has to emerge a lot stronger in the coming years. The one thing we do not have is auto transmission which we are buying from outside. This remains our weakest point. Mahindras should consider having its own auto transmission plant in Korea which will help SsangYong become a complete automaker, he adds.

Link:

Why Ssangyong does not believe in frugal engineering

Magnetic Medicine

Contact Information

Available for logged-in reporters only

Newswise Using tiny particles designed to target cancer-fighting immune cells, Johns Hopkins researchers have trained the immune systems of mice to fight melanoma, a deadly skin cancer. The experiments, described on the website of ACS Nano on February 24, represent a significant step toward using nanoparticles and magnetism to treat a variety of conditions, the researchers say.

Size was key to this experiment, says Jonathan Schneck, M.D., Ph.D., a professor of pathology, medicine and oncology at the Johns Hopkins University School of Medicines Institute for Cell Engineering. By using small enough particles, we could, for the first time, see a key difference in cancer-fighting cells, and we harnessed that knowledge to enhance the immune attack on cancer.

Schnecks team has pioneered the development of artificial white blood cells, so-called artificial antigen-presenting cells (aAPCs), which show promise in training animals immune systems to fight diseases such as cancer. To do that, the aAPCs must interact with immune cells known as naive T cells that are already present in the body, awaiting instructions about which specific invader they will battle. The aAPCs bind to specialized receptors on the T cells surfaces and presenting them with distinctive proteins called antigens. This process activates the T cells, programming them to battle a specific threat such as a virus, bacteria or tumor, as well as to make more T cells.

The team had been working with microscale particles, which are about one-hundredth of a millimeter across. But, says Schneck, aAPCs of that size are still too large to get into some areas of a body and may even cause tissue damage because of their relatively large size. In addition, the microscale particles bound equally well to naive T cells and others, so the team began to explore using much smaller nanoscale aAPCs. Since size and shape are central to how aAPCs interact with T cells, Karlo Perica, a graduate student in Schnecks laboratory, tested the impact of these smaller particles.

The so-called nano-aAPCs were small enough that many of them could bind to a single T cell, as the team had expected. But when Perica compared naive T cells to those that had been activated, he found that the naive cells were able to bind more nanoparticles. This was quite surprising, since many studies had already shown that naive and activated T cells had equal numbers of receptors, Schneck says. Based on Karlos results, we suspected that the activated cells receptors were configured in a way that limited the number of nanoparticles that could bind to them.

To see whether there indeed was a relationship between activation and receptor clustering, Perica applied a magnetic field to the cells, causing the nano-aAPCs to attract one another and cluster together, bringing the receptors with them. The clustering did indeed activate the naive T cells, and it made the activated cells even more active effectively ramping up the normal immune response.

To examine how the increased activation would play out in living animals, the team treated a sample of T cells with nano-aAPCs targeting those T cells programmed to battle melanoma. The researchers next put the treated cells under a magnetic field and then put them into mice with skin tumors. The tumors in mice treated with both nano-aAPCs and magnetism stopped growing, and by the end of the experiment, they were about 10 times smaller than those of untreated mice, the researchers found. In addition, they report, six of the eight magnetism-treated mice survived for more than four weeks showing no signs of tumor growth, compared to zero of the untreated mice.

We were able to fine-tune the strength of the immune response by varying the strength of the magnetic field and how long it was applied, much as different doses of a drug yield different effects, says Perica. We think this is the first time magnetic fields have acted like medicine in this way.

See the original post here:

Magnetic Medicine

Technique to create holes in graphene could improve water filters, desalination

PUBLIC RELEASE DATE:

25-Feb-2014

Contact: Abby Abazorius abbya@mit.edu 617-253-2709 Massachusetts Institute of Technology

Researchers have devised a way of making tiny holes of controllable size in sheets of graphene, a development that could lead to ultrathin filters for improved desalination or water purification.

The team of researchers at MIT, Oak Ridge National Laboratory, and in Saudi Arabia succeeded in creating subnanoscale pores in a sheet of the one-atom-thick material, which is one of the strongest materials known. Their findings are published in the journal Nano Letters.

The concept of using graphene, perforated by nanoscale pores, as a filter in desalination has been proposed and analyzed by other MIT researchers. The new work, led by graduate student Sean O'Hern and associate professor of mechanical engineering Rohit Karnik, is the first step toward actual production of such a graphene filter.

Making these minuscule holes in graphene a hexagonal array of carbon atoms, like atomic-scale chicken wire occurs in a two-stage process. First, the graphene is bombarded with gallium ions, which disrupt the carbon bonds. Then, the graphene is etched with an oxidizing solution that reacts strongly with the disrupted bonds producing a hole at each spot where the gallium ions struck. By controlling how long the graphene sheet is left in the oxidizing solution, the MIT researchers can control the average size of the pores.

A big limitation in existing nanofiltration and reverse-osmosis desalination plants, which use filters to separate salt from seawater, is their low permeability: Water flows very slowly through them. The graphene filters, being much thinner, yet very strong, can sustain a much higher flow. "We've developed the first membrane that consists of a high density of subnanometer-scale pores in an atomically thin, single sheet of graphene," O'Hern says.

For efficient desalination, a membrane must demonstrate "a high rejection rate of salt, yet a high flow rate of water," he adds. One way of doing that is decreasing the membrane's thickness, but this quickly renders conventional polymer-based membranes too weak to sustain the water pressure, or too ineffective at rejecting salt, he explains.

With graphene membranes, it becomes simply a matter of controlling the size of the pores, making them "larger than water molecules, but smaller than everything else," O'Hern says whether salt, impurities, or particular kinds of biochemical molecules.

See the original post:

Technique to create holes in graphene could improve water filters, desalination

Childrens Museum of Houston celebrates the science of the super small

Who knew something so small could be packed with so much fun?

Peek into the miniscule world of nanotechnology during our 7th Annual NanoDays Wonderweek, March 25 April 2, 2014.

NanoDays is part of a nationwide festival of programs exploring nanoscale science, matter and engineering.

Dont forget to check out the Matter Factory exhibit where you can learn all about materials science and nano technology.

Electric Squeeze: Explore piezoelectric materials and discover how they produce electricity when their shape is changed or how they change shape with electricity at Science Station.

Computer Hard Drive: Did you know magnets are used to collect data? Use ring magnets at Science Station and learn why computer hard drives are applications of nanotechnology.

Scanning Probe Microscopes: Learn about special tools that scientists use to detect and make images of nanoscale objects at Science Station.

Elevator to Space: Think like a scientist and build your own version of the elevator to space using breakthroughs in nanotechnology at Inventors Workshop.

Stained Glass Art: Nano sized gold particles were used to make stained glass windows in medieval times. Create your own mini stained glass window at Alexander Art Academy.

DNA: Discover how DNA recreates itself by using Wheat germ DNA at Power Science Lab.

Original post:

Childrens Museum of Houston celebrates the science of the super small

Navy mentoring making dreams a reality

U.S. Navy photo

Naval Surface Warfare Center Dahlgren Division (NSWCDD) and Virginia Tech Center for Naval Systems leadership are pictured at the NSWCDD-Virginia Tech Relationship Review held Jan. 30. The Navy and Virginia Tech representatives met to review current and planned efforts associated with their extensive contract and partnering vehicles. These efforts permit the universitys students and professors to work in key technology areas for NSWCDD, including work on technological projects with the commands scientists and engineers on location here.

How is the Navy making dreams a reality in the fields of science and engineering for wounded warriors, interns, new employees and students in middle and high school?

The Navy scientists and engineers who celebrated National Mentoring Month in January said the answer has not changed since they were mentees.

They responded unanimously with one word - mentors.

President Barack Obama agrees.

His Presidential Proclamation of National Mentoring Month, 2014, stated that: In every corner of our Nation, mentors push our next generation to shape their ambitions, set a positive course, and achieve their boundless potential. During National Mentoring Month, we celebrate everyone who teaches, inspires, and guides young Americans as they reach for their dreams.

National Mentoring Month began in 2002 as an outreach campaign to focus national attention on the need for mentors - individuals, businesses, government agencies, schools, faith communities and nonprofits - to work together to increase mentoring of our nations youth with the hope of assuring brighter futures.

Scores of scientists and engineers respond to this call by mentoring young students in the classrooms and robotics competitions in addition to the summer camps and laboratories at the Navys surface and undersea warfare centers.

They enjoy inspiring their young colleagues and students to live the dream.

Follow this link:

Navy mentoring making dreams a reality