Team turns banana peels and other trash into ‘flash graphene’ – Futurity: Research News

Share this Article

You are free to share this article under the Attribution 4.0 International license.

A new process can turn bulk quantities of just about any carbon source into valuable graphene flakes.

A banana peel, turned into graphene, could help facilitate a massive reduction of the environmental impact of concrete and other building materials.

This is a big deal, says James Tour, chair in chemistry as well as a professor of computer science and of materials science and nanoengineering at Rice University.

The world throws out 30% to 40% of all food, because it goes bad, and plastic waste is of worldwide concern. Weve already proven that any solid carbon-based matter, including mixed plastic waste and rubber tires, can be turned into graphene.

As reported in Nature, flash graphene is made in 10 milliseconds by heating carbon-containing materials to 3,000 Kelvin (about 5,000 degrees Fahrenheit). The source material can be nearly anything with carbon content. Food waste, plastic waste, petroleum coke, coal, wood clippings, and biochar are prime candidates, Tour says.

With the present commercial price of graphene being $67,000 to $200,000 per ton, the prospects for this process look superb, he says.

Tour says a concentration of as little as 0.1% of flash graphene in the cement used to bind concrete could lessen its massive environmental impact by a third. Cement production reportedly emits as much as 8% of human-made carbon dioxide every year.

By strengthening concrete with graphene, we could use less concrete for building, and it would cost less to manufacture and less to transport, he says.

Essentially, were trapping greenhouse gases like carbon dioxide and methane that waste food would have emitted in landfills. We are converting those carbons into graphene and adding that graphene to concrete, thereby lowering the amount of carbon dioxide generated in concrete manufacture. Its a win-win environmental scenario using graphene.

Turning trash to treasure is key to the circular economy, says co-corresponding author Rouzbeh Shahsavari, an adjunct assistant professor of civil and environmental engineering and of materials science and nanoengineering and president of C-Crete Technologies. Here, graphene acts both as a 2D template and a reinforcing agent that controls cement hydration and subsequent strength development.

In the past, Tour says, graphene has been too expensive to use in these applications. The flash process will greatly lessen the price while it helps us better manage waste.

With our method, that carbon becomes fixed, he says. It will not enter the air again.

The flash graphene process can convert that solid carbon into graphene for concrete, asphalt, buildings, cars, clothing, and more, Tour says.

Flash Joule heating for bulk graphene, which lead author Duy Luong, a graduate student, developed in the Tour lab, improves upon techniques like exfoliation from graphite and chemical vapor deposition on a metal foil that require much more effort and cost to produce just a little graphene.

Even better, the process produces turbostratic graphene, with misaligned layers that are easy to separate.

A-B stacked graphene from other processes, like exfoliation of graphite, is very hard to pull apart, Tour says. The layers adhere strongly together. But turbostratic graphene is much easier to work with because the adhesion between layers is much lower. They just come apart in solution or upon blending in composites.

Thats important, because now we can get each of these single-atomic layers to interact with a host composite, he says.

The lab notes that used coffee grounds transformed into pristine single-layer sheets of graphene.

Bulk composites of graphene with plastic, metals, plywood, concrete, and other building materials would be a major market for flash graphene, according to the researchers, who are already testing graphene-enhanced concrete and plastic.

The flash process happens in a custom-designed reactor that heats material quickly and emits all noncarbon elements as gas.

When this process is industrialized, elements like oxygen and nitrogen that exit the flash reactor can all be trapped as small molecules because they have value, Tour says.

He says the flash process produces very little excess heat, channeling almost all of its energy into the target.

You can put your finger right on the container a few seconds afterwards, Tour says. And keep in mind this is almost three times hotter than the chemical vapor deposition furnaces we formerly used to make graphene, but in the flash process the heat is concentrated in the carbon material and none in a surrounding reactor.

All the excess energy comes out as light, in a very bright flash, and because there arent any solvents, its a super clean process, he says.

Luong did not expect to find graphene when he fired up the first small-scale device to find new phases of material, beginning with a sample of carbon black.

This started when I took a look at a Science paper talking about flash Joule heating to make phase-changing nanoparticles of metals, he says. But Luong quickly realized the process produced nothing but high-quality graphene.

Atom-level simulations by coauthor Ksenia Bets confirmed that temperature is key to the materials rapid formation.

We essentially speed up the slow geological process by which carbon evolves into its ground state, graphite, she says. Greatly accelerated by a heat spike, it is also stopped at the right instant, at the graphene stage.

It is amazing how state-of-the-art computer simulations, notoriously slow for observing such kinetics, reveal the details of high temperature-modulated atomic movements and transformation, Bets says.

Tour hopes to produce a kilogram (2.2 pounds) a day of flash graphene within two years, starting with a project the Department of Energy recently funded to convert US-sourced coal.

This could provide an outlet for coal in large scale by converting it inexpensively into a much-higher-value building material, he says.

Additional coauthors are from Rice and C-Crete Technologies. The Air Force Office of Scientific Research and the National Science Foundation supported the research.

Source: Rice University

Original Study DOI: 10.1038/s41586-020-1938-0