July 18, 2017 The new technology of producing unsinkable material from the aluminum alloy was patented at the Peter the Great St. Petersburg Polytechnic University (SPbPU). Credit: Peter the Great St. Petersburg Polytechnic University

A new technology of producing an unsinkable aluminum alloy was developed at Peter the Great St. Petersburg Polytechnic University (SPbPU). Porosity is produced by the addition of foaming gas into liquid aluminum during re-melting. The porous materials can increase stiffness and sound and heat insulating proprieties, according to the SPbPU's Media-center.

"A high porosity level can be used to decrease the density of structural elements, e.g. sheets. The density can be decreased even lower than the density of water. Resulting structural elements would be unsinkable. And its usage in shipbuilding will ensure unsinkability even with a leak in the hull," says Oleg Panchenko, deputy head of the Laboratory of Light Materials and Structures SPbPU, one of the inventors.

In many cases, the carrying capacity of thin materials (1 mm or less) is sufficient for a lot of structures. But material with such thickness sometimes has geometric limitations (the thickness is too small for manipulation) or it can't be joined without deformation. Due to the material's porosity, it is possible to increase the thickness, maintaining the weight while stiffening the structure.

A similar technology has been patented in Japan, but it produces only entirely porous material. Researchers of SPbPU found a way to produce homogeneous and heterogeneous distribution of pores in the material. Because it is made of solid material, it can be either porous if necessary or with nonporous thickening or solid structure. Using this technology, double-layer sandwiches may be produced in which only one side is porous, increased density can be conferred to selected areas for mechanical or welded joints.

Explore further: Selective laser melting additive technology method for material microstructure formation

Provided by: Peter the Great Saint-Petersburg Polytechnic University

Scientists of Peter the Great St. Petersburg Polytechnic University (SPbPU) and Delft University of Technology developed a technology for obtaining new metal structures using a selective laser melting method, an additive ...

Nature does amazing things with limited design materials. Grass, for example, can support its own weight, resist strong wind loads, and recover after being compressed. The plant's hardiness comes from a combination of its ...

Researchers from the the Great St. Petersburg Polytechnic University (SPbPU) and collaborators from industry have developed new technology for varicose vein obliteration treatment by the means of focused, high-intensity ultrasound.

Scientists of Institute of Physics, Nanotechnology and Telecommunications of Peter the Great St. Petersburg Polytechnic University (SPbPU) and collaborators have established an international consortium to increase the accuracy ...

Known for their extraordinary surface area, a sugar packet equivalent of metal-organic framework provides a city block (2.5 acres) of area to absorb gas or catalyze reactions. The challenge comes in consistently manufacturing ...

Flakes of graphene welded together into solid materials may be suitable for bone implants, according to a study led by Rice University scientists.

(Phys.org)A pair of researchers with the University of California and Lawrence Berkeley National Laboratory has found a way to automate reaction discoveries, thereby speeding up the process. In their paper published in ...

After being hidden for centuries, the secrets within medieval manuscripts might soon come to light.

Enzyme activity is determined by the structure of a particular region of a protein called the active site. The generation of completely new active sites capable of enzyme catalysis is, arguably, one of the most fundamental ...

Photosynthesis, which allows energy from the sun to be converted into life-sustaining sugars, can also be hazardous to green plants. If they absorb too much sunlight, the extra energy destroys their tissue.

Scientists at the U.S. Department of Energy's (DOE) Brookhaven National Laboratory had just finished an experiment with a two-dimensional (2D) structure they synthesized for catalysis research when, to their surprise, they ...

EPFL scientists have developed a ligand molecule that connects peptide drugs to blood-serum albumin and keeps them from being cleared out by the kidneys too soon. The ligand is easy to synthesize and can extend the half-life ...

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

Read more:

New technology for producing porous aluminum - Phys.Org