July 7, 2017 by Renee Meiller Shrinking photodetectors like this one, created and tested in the laboratory of UW-Madison engineering Professor Zhenqiang (Jack) Ma, help make consumer electronics smaller. Credit: Stephanie Precourt/UW-Madison

In today's increasingly powerful electronics, tiny materials are a must as manufacturers seek to increase performance without adding bulk.

Smaller also is better for optoelectronic deviceslike camera sensors or solar cellswhich collect light and convert it to electrical energy. Think, for example, about reducing the size and weight of a series of solar panels, producing a higher-quality photo in low lighting conditions, or even transmitting data more quickly.

However, two major challenges have stood in the way: First, shrinking the size of conventionally used "amorphous" thin-film materials also reduces their quality. And second, when ultrathin materials become too thin, they become almost transparent and actually lose some ability to gather or absorb light.

Now, in a nanoscale photodetector that combines a unique fabrication method and light-trapping structures, a team of engineers from the University of Wisconsin-Madison and the University at Buffalo has overcome both of those obstacles.

The researcherselectrical engineering professors Zhenqiang (Jack) Ma and Zongfu Yu at UW-Madison and Qiaoqiang Gan at Buffalodescribed their device, a single-crystalline germanium nano-membrane photodetector on a nano-cavity substrate, today (July 7, 2017) in the journal Science Advances.

"The idea, basically, is you want to use a very thin material to realize the same function of devices in which you need to use a very thick material," says Ma.

The device consists of nano-cavities sandwiched between a top layer of ultrathin single-crystal germanium and a reflecting layer of silver.

"Because of the nano-cavities, the photons are 'recycled' so light absorption is substantially increasedeven in very thin layers of material," says Ma.

Nano-cavities are made up of an orderly series of tiny, interconnected molecules that essentially reflect, or circulate, light. Gan already has shown that his nano-cavity structures increase the amount of light that thin semiconducting materials like germanium can absorb.

However, most germanium thin films begin as germanium in its amorphous formmeaning the material's atomic arrangement lacks the regular, repeating order of a crystal. That also means its quality isn't sufficient for increasingly smaller optoelectronics applications.

That's where Ma's expertise comes into play. A world expert in semiconductor nano-membrane devices, Ma used a revolutionary membrane-transfer technology that allows him to easily integrate single crystalline semiconducting materials onto a substrate.

The result is a very thin, yet very effective, light-absorbing photodetectora building block for the future of optoelectronics.

"It is an enabling technology that allows you to look at a wide variety of optoelectronics that can go to even smaller footprints, smaller sizes," says Yu, who conducted computational analysis of the detectors.

While the researchers demonstrated their advance using a germanium semiconductor, they also can apply their method to other semiconductors.

"And importantly, by tuning the nano-cavity, we can control what wavelength we actually absorb," says Gan. "This will open the way to develop lots of different optoelectronic devices."

Explore further: This 'nanocavity' may improve ultrathin solar panels, video cameras and more

More information: "Single-crystalline germanium nanomembrane photodetectors on foreign nanocavities" Science Advances (2017). advances.sciencemag.org/content/3/7/e1602783

The future of movies and manufacturing may be in 3-D, but electronics and photonics are going 2-D; specifically, two-dimensional semiconducting materials.

Associated with unhappy visits to the dentist, "cavity" means something else in the branch of physics known as optics.

New thin-film semiconductor techniques invented by University of Wisconsin-Madison engineers promise to add sensing, computing and imaging capability to an amazing array of materials.

University of Michigan chemists have developed a greener, cheaper way to make single-crystalline semiconductor films, components at the heart of all of our electric gadgetry.

DGIST announced that Professor Kyung-in Jang's research team succeeded in developing a technology that can control various color changes by coating several nanometers of semiconducting materials on a metal substrate through ...

In the past decade, two-dimensional, 2-D, materials have captured the fascination of a steadily increasing number of scientists. These materials, whose defining feature is having a thickness of only one to very few atoms, ...

Early phase Northwestern Medicine research has demonstrated a potential new therapeutic strategy for treating deadly glioblastoma brain tumors.

To enhance the visibility of organs as they are scanned with magnetic resonance imaging (MRI), patients are usually injected with a compound known as a contrast agent before going into the scanner. The most commonly used ...

From checkout counters at supermarkets to light shows at concerts, lasers are everywhere, and they're a much more efficient light source than incandescent bulbs. But they're not cheap to produce.

A world-first non-destructive quality control method from the National Physical Laboratory (NPL) has enabled Oxford Instruments to commercialise wafer-scale fabrication technology for 2-D material MoS2.

Although scientists have for decades been able to synthesize nanoparticles in the lab, the process is mostly trial and error, and how the formation actually takes place is obscure. However, a study recently published in Nature ...

In today's increasingly powerful electronics, tiny materials are a must as manufacturers seek to increase performance without adding bulk.

Please sign in to add a comment. Registration is free, and takes less than a minute. Read more

View post:

Powerful new photodetector can enable optoelectronics advances - Phys.Org